Stimmen - 6, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: ASA Electronics Dateigröße: 94.2 kb Dateiname: 3587cc44-ae1a-4487-836b-c2bd44426165.pdf Unterrichtssprache:

2. Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc.) 3. Remove batteries when the remote is not used for a long time. TV Mode Button Function 1. POWER Power On/Off 3. A/P (AUTO PROGRAM) Channel Scanning 4. / 5./ 14./ 16. ( ^ < > Ў) Up/Down/Left/Right 6. CH (+/-) Channel Up/Down 7. 1/2/3/4/5/6/7/8/9/0 Numbers 8. LED TV Mode – Red Flash DVD Mode – Green Flash 9. TV TV Mode Selected 11. MUTE (TV) Mutes Audio 12. MENU OSD Menu for TV setting 13. ENTER Select Input 15. VOLUME (+/-) Audio Increase/Decrease 17. RECALL Channel Return Notes: 1. Some buttons on remote have two functions (for TV & DVD mode). When press the TV button, the remote will get in TV function mode, each time when press the TV function button, the LED will flash “RED” light. When in DVD mode, each time when press the DVD function button, the LED will flash “GREEN” light. 2. Some of buttons are designed for operating single disc DVD player, pls read the DVD manual to operate the DVD player 1 Remote Operation (2) Button Descriptions Included Remote 1 MENU 1. Press “MENU” to activate the OSD menu. 2. Press again to navigate options TUNER MODE (RF input mode) AUDIO OUTPUT (audio output mode) CHANNEL SKIP (channel skip mode) RESET:(restore to factory default value) 3. Press < or > to browse and select an option. OSD menu will disappear 6 seconds after no input. 2 < / > Browse and select an option for a item in the OSD menu 3 VOL-Decrease the volume of sound. 4 VOL+ Increase the volume of sound. JENSEN TV-specific 5 A/P Scan all channels in CATV and AIR modes and save channels that are detected. 6 CH+ If “CHANNEL SKIP” is ON: Will tune TV to next available channel. If “CHANNEL SKIP” is OFF: Will tune TV up by one number. 7 CH- If “CHANNEL SKIP” is ON: Will tune TV to previous available channel. If “CHANNEL SKIP” is OFF: Will tune TV down by one number. 8 Recall Return to previous channel in the specific mode set in the “TUNER MODE”. 9 0 ~ 9 Direct Input for channel number OSD (On Screen Display) Control MENU ITEMS OPTIONS DEFAULT VALUE LAST MEMORIZED MENU, <, > TUNER MODE CABLE AIR YES AIR AUDIO OUTPUT STEREO STEREO YES MAIN SUB MONO CHANNEL SKIP ON ON YES OFF RESET > or < N/A N/A VOL-, VOL+ VOLUME Scrolling bar medium YES 2 Basic Operations 1. Power TBXPAL On 1-1 Feed the “+12VDC” power supply to TBXPAL’s “POWER INPUT” socket. 2. Set TV source to A/V input 3. Scan Channels and Auto-programming 3-1 Press the [ A /P ] button on the remote. Tuner will scan all channels in the “AIR” and “CATV” modes and memorize channels with PAL TV signal in the modes for “AIR” and “CATV”. It takes 45 and 75 seconds to scan in the “AIR” and “CATV” modes respectively. 4. Adjust the volume of Audio Output 4-1 Press the [ VOL + ] button to increase the audio volume. 4-2 Press the [ VOL - ] button to decrease the audio volume. 5. Adjust the TBXPAL’s System Settings Press [ MENU ] button to activate the setting menu. 5-1 The 1st menu item is “TUNER MODE”. Press [ > ] or [ < ] to browse and select a...

Herunterladen

Geben Sie zwei Ziffern: