Cautions signify information that could prevent service interruption or damage to equipment. Warnings provide information that could prevent injury or endangerment to human life. Copyright © 2007 ADTRAN, Inc. 61200796L1-31A NetVanta 7100 Administrator’s Guide Frequently Asked Questions (FAQs) Frequently Asked Questions (FAQs) How do I access the phone system administrative settings using my computer? Connecting Using a Web Browser on page 13 How do I add a new phone to the system? Create a New U

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Grounding Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Wallmounting the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Make sure the ACTIVE MAP is set to the correct map (the map you want running) before exiting the DS0 MAPS menu. Left arrow back to the main menu. Appendix D. Configuring the Unit for DSX-1 Applications Initial Setup 1. Setting up the Interfaces From the main menu, select INTERFACES. 2 Highlight the CONFIG menu for the T1 interface and press . 3 Right arrow to select FORMAT and choose ESF or SF. This format must match the format used by the other units in the network. Set the LINE CODE to

For example, if the timer expires but the switch continues to request battery removal, the Total Access 6XX will follow the switch and continue to remove battery. For ATM mode, if the timer is set to IGNORE SWITCH, the IAD will never remove battery. Press on the TANDEM [+] option to view the TANDEM options if the port mode is set to TANDEM (E&M). Set the CONVERSION MODE of the port to either LOOP START or GROUND START. Set the SUPERVISION of the port to either IMMEDIATE or WINK. Be sure

ATM FORUM PROFILE 10 enables support of 64 kbps PCM calls as well as 32 kbps ADPCM calls. CONNECTION (VOICE) > SETUP > LES-CAS GW SIM Configures the interface to simulate a LES-CAS gateway. Enable this parameter only when back-to-back IAD testing. CONNECTION (VOICE) > SETUP >IAD IP ADDRESS QOS > QUALITY OF SERVICE Quality of Service for ATM Undefined Bit Rate (UBR) and non-real time Variable Bit Rate (VBR) for the data PVC DLCI. This setting depends on the type of network ATM service being provi

All Rights Reserved. Printed in U.S.A. Document Revision Date Description of Changes A October 2002 Initial Release B May 2004 Updated to include menu changes for firmware release. Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. Shielded cables must be used with this unit to ensure compliance with Class A FCC limits. Changes or

The redial history screen will display. Use the navigation arrows to scroll to a previously dialed number, then press the Dial soft key. Transferring Calls To use unattended transfer: 1. During an active call, select the Transfer function key. 2. Dial the extension to which to transfer the call. 3. Press the Transfer key again when you hear the extension ring. This will disconnect you from the call. To use attended transfer: 1. During an active call, select the Transfer function key. 2.

In order for the customer to take advantage of the ITSP.s offerings and not be affected by ShoreTel SIP trunk limitations they will need to implement an Integrated Access Device (IAD) to convert the SIP signaling to a T1 PRI. In this manner ShoreTel will not have any feature limitations and the customer can still take full advantage of the ITSP.s offerings. This solution includes Bandwidth.com SIP trunk, ADTRAN.s market-leading Total Access® series of routing, switching and IP gateway products,

2. Select Connect from the graphic display. 3. Enter your extension, then press # (or simply press # when accessing voicemail from your extension). 4. Enter your password (default password is 1234), then press #. Voicemail setup wizard 1. Log into your voicemail system and follow the voice prompts. 2. Press 1 to record your full name (first name/last name). To log in from another phone or check messages remotely 1. Dial your voicemail system access number. Access number: ________________________

Phone Feature Quick Reference Guide Disable Forwarding Press the Forward soft key, and then select Disable. Do Not Disturb Press the Do Not Disturb button to enable or disable Do-Not-Disturb mode. Disable by pressing the Do Not Disturb button again. Hands-free Auto-Answer Intercom Dial ** in front of any IP phone extension number to invoke hands- free auto-answer intercom. Hands-free Auto-Answer Intercom Do not Disturb To Block hands-free intercom calls to your extension, Dial *97x (where x = 1-