Login: Record an emergency connect SOS message The person will hear the emergency connect SOS message if the call is answered. You can record a 10 second message maximum. In the hook position, 1. Press the MUTE button. 2. Using the or arrow buttons, highlight <
4. The LCD shows the current Remote code. Enter the new code you would like to set up and then press the OK soft key. Remote Access You can access many features of your answering machine remotely from any touch tone phone. A four-digit security Remote code is required to access the system and the factory default code is 0000. To enter remote access: 1. Dial your phone number from any touch tone phone. 2. When the Announce1/Announce2 message starts to play, you may enter the remote access mode by
To change the language used for your Caller ID display: In the hook position, 1. Press the MUTE button to access the Programming Menu. 2. Using the or arrow buttons, highlight/select <
There may be a phone off the hook somewhere in your home. Check that all phones in your home are hung up. 2. Check the Auto On Hook Feature (See page 20). 3. The remote band’s battery is dead or is not installed properly. Check the remote band battery (See page 37). 4. Check the antenna on base. Caller ID information does not show 1. Make sure you are subscribed to Caller ID through your local phone company. 2. Check batteries. No Caller ID information while on a call 1. Make sure your service p
Please read this User Guide carefully in order to get the very best results from your telephone. Keep the manual near the telephone for easy reference. Please visit our web site at to: Register your product, download additional manuals, and review trouble shooting tips. WARNING: The Talk500ER Emergency Connect Telephone should be tested regularly to ensure proper delivery of your pre-recorded emergency message when activated by the Emergency Button or pendant. This is your responsibility as the
7. Press the C button, then the LCD Screen will display <
6 .................. Congratulations Pg. 6-8............... Important Safety Instructions Pg. 9-13............. Location of Controls Pg. 13-16 .......... Key Descriptions Pg. 16-17 .......... Handset LCD Icon Descriptions Pg. 17-20 .......... Installation Steps Pg. 20 ................ Hearing Aid and Cochlear Implant Users BASE SPEAKERPHONE OPERATION MENU NAVIGATION Pg. 22-23 .......... Menu Map LCD DISPLAY Pg. 23-24 .......... Language Pg. 24 ................ Set Contrast Pg. 25 ...............
Be sure to observe battery polarity as imprinted on the base of the compartment. 3. Snap the battery compartment door back in place. 4. The batteries will last approximately 1 year before needing replacement. 5. Note: The telephone ringer will operate with or without batteries. 6. Note: When replacing batteries, you will need to remove the Wall Plate adapter if in use. Slide the phone upward to remove & disconnect the phone from your existing wall jack. Slowly slide the Wall Plate adapter down u
You will be prompted to enter a PIN CODE (default is 0000) Enter the PIN CODE then press the SOFT KEY to select RESET. If the PIN CODE is validated all handset setting will return to the factory default, otherwise a warning tone will be heard and the settings will remain. Note: After resetting the handset will return to standby mode. 29 - ENGLISH Key Lock To lock the keys, while the phone is Standby mode just keep the STAR KEY depressed until "HS LOCKED" appears on the LCD Screen. At the to
If you want to delete the “New voice mail” text on your LCD, press the ^ in standby mode and then press and hold the key. Note: You may permanently turn off the red flashing visual indicator for both message waiting and new calls by simply setting the indicator to the OFF position (this switch is located on the underside of the telephone. CALLER ID (CID) OPERATION Reminder: Press the Back or Exit soft key from any menu to return to the previous screen. Otherwise, after 60 seconds, the phone will
