Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Aiphone Dateigröße: 264.61 kb Dateiname: 228e127b-e772-4f2e-a641-1c2ee6d19b9f.pdf Unterrichtssprache:

10 watts, 30 watts and 60 watts amplfiers are available and may be installed in multiples for greater output. - INSTRUCTIONS - , . This symbol on the nameplate means the product L/ is Listed by Underwriters Laboratories Inc. iitiaiii (BACK VIEW) SPECIFICATIONS * Power output: * Distortion: * Frequency response: * Input: * Output: * Power requirements: * Power consumption: * Dimensions: Weight: NAMES AND FUNCTIONS (T) Power lamp (2) Power switch (3) AC cord (4) Output (25/70.7 volt alternative) Q) Circuit breaker (6) Input terminals (A & E) © Fuse holder (8) G terminal for grounding PG-10A.......10 watts rms PG-30A.......30 watts rms PG-60A.......60 watts rms Less than 3% at 1,000 Hz rated output ±3 db, 100- 15,000 Hz 100 mV for rated output 25 volts and 70.7 volts balanced 120 volts AC, 50/60 Hz PG-10A.......30 watts PG-30A.......75 watts PG-60A.......130 watts PG-10A 245mm x 77mm x 152mm, 9-11/16" x 3-1/16" x 6" PG-30A & PG-60A 340mm x 95mm x 205mm, 13-5/16" x 3-3/4" x 8-1/16" PG-10A.......2.7 Kg, 6.0 LBS PG-30A.......5.0 Kg, 11.0 LBS PG-60A.......6.5 Kg, 14.3 LBS FEATURES * Designed for use with AIPHONE intercoms in conjunction with paging adaptor. * Full range volume and tone controls on paging adaptor. * Amplifier output may be either 25V or 70.7V constant voltage balanced loads. * Complimentary transistor at the output stage ensures extreamly low distortion and high damping factor. * Circuit breaker protects internal circuit against overloaded or shorted output line. * May be shelf or wall mounted. INSTALLATION Do not attempt to install your PG-A amplifier until you have read and thoroughly understood the installation procedure. Aiphone’s warranty for the amplifier and the system is void if amplifier is installed in a manner other than described in this manual. ADAPTOR REQUIREMENTS The following AIPHONE intercoms have paging capability and may be connected to PG-A amplifier in conjunction with a paging adaptor. The type of adaptor must be decided according to the type of intercom system you install and the paging mode you wish to have. Each paging block requires one PG-A amplifier and appropriate number of speakers. TYPE OF INTERCOM ADAPTOR REQUIREMENTS STRAIGHT PAGING BLOCK PAGING TALKBACK PAGING © TA-F one PG-U not available one PG-U and one PA-B (2) TA-H (3) TA-Y one PG-U one PG-U and one PA-B per block one PG-U and one PA-B per block @ TS-K one PG-U one PG-U and one PA-B per block one PG-U and one PA-B per block © KAH one PA-1 one PA-1 per block one PA-2 per block (6) TB-F one PB-1 not available one PB-1 and one PB-2 © TB-H one PB-1 one PB-1 per block one PB-1 and one PB-2 per block (D MC-3 one MC-A not available not available Begin your installation by connecting the paging adaptor to your intercom system (and background music source if required) by referring to the instruction sheet of the paging adaptor packed with each unit. Requirements stated on the instruction sheet of the...

Herunterladen

Geben Sie zwei Ziffern: