Stimmen - 5, Durchschnittliche Bewertung: 4.4
(
)
)
|
Anleitung Zusammenfassung
You can read it completely for a solid understanding of your conference station’s capabilities or refer to the table below for pointers to commonly used sections. If you want to... Then... Review safety information See Safety and Performance Information, page 2 Connect the conference station See Connecting Your Conference Station, page 4 Use the conference station after it is installed Start with An Overview of Your Conference Station, page 8 Learn what the conference station buttons mean See Understanding Buttons and Hardware, page 8 Learn about the display screen See Understanding Display Screen Features, page 12 Make calls See Placing a Call—Basic Options, page 15 Put calls on hold See Using Hold and Resume, page 17 Mute calls See Using Mute, page 18 Transfer calls See Transferring Calls, page 19 Make conference calls See Making Conference Calls, page 20 Set up speed dialing See Speed Dialing, page 23 Share a phone number See Using a Shared Line, page 25 Change the ring volume or type See Customizing Rings and Message Indicators, page 29 Change voice message indicators See Customizing Rings and Message Indicators, page 29 View your missed calls See Using Call Logs, page 31 Listen to your voice messages See Accessing Voice Messages, page 36 See softkey and icon definitions Refer to the Quick Reference Card in the front of this guide Finding Additional Information You can access the most current conference station documentation on the World Wide Web at this URL: You can access the Cisco website at this URL: You can access international Cisco websites from this URL: Safety and Performance Information Refer to these sections for information about the impact of power outages and other devices on your conference station. Power Outage Your accessibility to emergency service through the phone is dependent on the phone being powered. If there is an interruption in the power supply, Service and Emergency Calling Service dialing will not function until power is restored. In the case of a power failure or disruption, you may need to reset or reconfigure equipment before using the Service or Emergency Calling Service dialing. Using External Devices The following information applies when you use external devices with the conference station: Cisco recommends the use of good quality external devices (such as headsets) that are shielded against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take one or more of the following actions: •Move the external device away from the source of the RF or AF signals. •Route the external device cables away from the source of the RF or AF signals. •Use shielded cables for the external device, or use cables with a better shield and connector. •Shorten the length of the external device cable. •Apply ferrites or other such devices on the cables for the external device. Cisco cannot guarantee the performance of the system because Cisco has no control over the quality of external devices, cables, and connectors. The system will perform adequately when suitable devices are attached using good quality cables and connectors. CautionIn European Union countries, use only external speakers and microphones that are fully compliant with the EMC Directive [89/336/EC]. Cisco Product Security Overview This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately. A summary of U.S. laws governing Cisco cryptographic products may be found at: If you require further assistance please contact us by sending email to export@cisco.com. Accessibility Features A list of accessibility features is available upon request. Connecting Your Conference Station Your system administrator will likely connect your new Cisco Unified IP Conference Station 7937G to the corporate IP telephony network. If that is not the case, refer to the following graphics and tables to connect the conference station. Connecting the Conference Station to the Network The following graphic and table describe how to connect the conference station to the network. NoteConnecting multiple conference stations is not a supported configuration and will not work. 12...