Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
11) Only use attachments/accessories specified by the manufacturer. 12) Unplug the apparatus during lighting storms or when unused for long period of time. 13) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 2 Telephone Number Keypad Redial Button Telephone Answer/Disconnect On/Off Volume Up/Down Channel Up/Down TV Screen Door Answer/Monitor FM/AM PlayRecord LCD Display Priority Call/SetSeek Up/Down { { Monitor swings down for viewing Monitor swings up when not viewing Contrast Color Brightness 3 Remote Control Operation The remote control comes with a disc battery (CR2025) that must be installed prior to operating the remote control. • Remove remote control from bag • Remove battery and battery holder from their bag • Place battery with “+” side facing up on the curved edge side of the battery holder • Insert the battery holder in the bottom edge of the remote control (it will only insert one way) The remote control operation is easily accomplished by using the device in place of the monitor’s buttons and pointing at the view screen the desired function. • To turn on the monitor’s power, Press the “Power” button The monitor should power, if it had no power, or turn off if it had power • To answer the door , Press the “Door” button on the remote control The image from the camera should be on the view screen and audio established with the camera location • To turn on the TV, Press the “TV” button • To increase/decrease the channel selected, Press the “Channel Up/Down” buttons, or input the channel number on the keypad • To increase/decrease the volume level selected, Press the “Volume Up/Down” buttons • To Mute the sound, Press the “Mute” button • To listen to the AM/FM radio, Press the “AM/FM button • To change stations, Press the “Channel Up/Down” buttons to manually tune to the desired station, or Seek Up/Down” buttons to initiate the Seek function, or press the stored memory location 1 – 9 on the keypad • To activate the telephone, Press the “Tel” button to either obtain dial tone or to hang up Monitor Controls ON / OFF Button The pushbutton control switch for this on / off is located on the bottom left on the front of the VSUC4 Monitor Station. This control switch button is pressed in momentarily to power the monitor or if power exists to monitor, press button momentarily to turn off. Seek Up / Down Buttons There are two buttons to control the “Seek” function for the radio. One with the arrow pointing up is for stepping through the stations incrementally. One with arrow pointing down is for stepping through the radio stations in descending order. Priority Call / Set Button The priority call / set button is used to initiate the program mode for the monitor’s time, timer, TV Mode used and return to clock set. In intercom mode, this button is used together with the door button to disable the microphone at the camera(s). Channel Up / Down Buttons There are two buttons to control the channel selection. One with the arrow pointing up is for incremental stepping the channel selection. One with arrow pointing down is for stepping through the channel selection in descending order. Other uses for the channel buttons while in the set mode is for setting the time, as it is used to toggle between the hour and minutes during their setting use, setting the alarm timer, and selecting the cable mode. View Monitor Side Controls There are three (3) ThumbWheels/Switches on the right side of the viewing screen. From the top is the contrast, for adjusting the contrast setting of the screen image to the desired level. The middle switch is the color control, for adjusting the color of the screen image to the desired level. The bottom switch is the Brightness control, for adjusting the brightness of the screen image to the desired level. Monitor Operation Telephone Number Keypad The sequence of keypad numbers layout is the same as all current telephone keypads. 0 – 9, the asterisk star and pound key are the numerical and symbol button keys. Redial button and Tel button are just to the right of the keypad. The “Tel Button” activates and makes audible the telephone circuitry or if pressed while active, hangs up the line. LCD Display The LCD displays the time, AM or PM, the active camera – CA-1 or CA-2, the word camera displays and will flash indicating another door call from the other camera has been initiated. It also is the viewing point for the TV or radio set up information, timer alarm, radio channels, TV channels, and the active mode (ie: TV, FM, AM). Volume Up / Down Buttons There are two buttons to control the volume. One with the arrow pointing up is for increasing the volume. One with arrow pointing down is for decreasing the volume. A differ...