Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
Caution: While reviewing call records, if you hold down DELETE for longer than 6 seconds without pressing a REVIEW button, the system deletes all caller information from its memory. 3. Release DELETE. 17 43-972.fm Page 18 Monday, August 16, 1999 4:19 PM CONNECTING TO THE PHONES/PHONE LINES The module connects to your phone(s) and the phone line(s) using four modular phone line connectors. You can connect your module between a two-line phone (or one or two one-line phones) and a two-line modular phone line jack (or two one-line jacks). To use all of the module’s features, you must connect it to two separate phone lines. Each of these lines must have its own phone number. If you do not have two phone lines, contact your phone company to get a second line. Notes: • If you connect the module to only one phone line, the module displays Caller ID information only for that line. • If your phone lines do not have modular jacks, you can update the wiring yourself. Or, you can have the telephone company update your telephone wiring for you. – RadioShack stores sell jacks and adapters to convert older wiring methods to modular wiring. – The telephone company charges to install the necessary jacks. – The USOC number of the jack to be installed is RJ11C (for a one- line phone line jack) or RJ14C (for a two-line phone line jack). 18 43-972.fm Page 19 Monday, August 16, 1999 4:19 PM Connecting to a Two-Line Phone and a Two-Line Phone Line Jack Connecting to a Two-Line Phone and Two One-Line 9VDC Jacks 19 9VDC 43-972.fm Page 20 Monday, August 16, 1999 4:19 PM Connecting to a One-Line Phone and a Two-Line Phone Line Jack 9VDC Connecting to Two One-Line Phones and a Two-Line Phone Line Jack 20 9VDC 43-972.fm Page 21 Monday, August 16, 1999 4:19 PM Connecting to Two One-Line Phones and Two One- Line Jacks 9VDC CONNECTING TO AN ANSWERING MACHINE You can connect an answering machine to your module, phone, and phone line. After you connect the answering machine, set it to answer calls after at least two rings. 21 43-972.fm Page 22 Monday, August 16, 1999 4:19 PM Connecting for Both Lines or Line 1 Only 9VDC Connecting for Line 2 Only 22 9VDC 43-972.fm Page 23 Monday, August 16, 1999 4:19 PM MOUNTING THE MODULE You can place the module directly on a desk, shelf, or table. Or, you can mount the module on a wall. To mount the module on the wall, you need two screws (not supplied) with heads larger than the holes on the back of the supplied mounting bracket. Follow these steps to mount the module on a wall. 17 32 2 inch 1. Drill two holes into the wall 217/32 inches apart. 1 8 inch 2. While holding the side of the mounting bracket against the wall as shown, thread a mounting screw through each round hole in the mounting bracket then tighten the mounting screws into the wall. 23 43-972.fm Page 24 Monday, August 16, 1999 4:19 PM CALLER ID SYSTEM 2000 CALLER ID SYSTEM 2000 Mounting Bracket 3. Route the phone line cords and AC adapter cord through the upper and lower slots on the mounting bracket. 4. Align the slots on the back of the module with the hooks on the mounting bracket, then gently push the module down on the mounting bracket to secure it. 24 43-972.fm Page 25 Monday, August 16, 1999 4:19 PM OPERATION RECEIVING AND STORING CALLS When you receive a call, the Caller ID information sent by the phone company, including the caller’s telephone number (and name, if available) and the call’s date and time, automatically appears on the display between the first and second rings. The module also displays the line on which the call was received. As it receives calls, the module stores the information for later recall. Time of Call Date of Call Sequentia Call Numbe Caller's Telephone Number Caller's Name Notes: • If you receive a call then receive another call within 5 seconds, the module does not store information about the second call. • After the module’s memory is full, the next call’s information replaces the oldest stored records. 25 43-972.fm Page 26 Monday, August 16, 1999 4:19 PM The module displays the current date and time (as sent by the telephone company with call information). REVIEWING CALLS • To select the line you want to review, press LINE SELECT until LINE 1 or LINE 2 appears on the display. Each time you press LINE SELECT, the module displays LINE 1, LINE 2, and both LINE 1and LINE 2, in order. Repeatedly press REVIEW to view more recent calls on the line(s) you selected. Repeatedly press REVIEW to review previous calls. • To select both lines and review all calls on both lines (in the order the calls were received), repeatedly press LINE SELECT until LINE 1 and LINE 2 appear on the display, then repeatedly press REVIEW or REVIEW. 26 REVIEWDELETE 43-972.fm Page 27 Monday, August 16, 1999 4:19 PM Notes: • If there are no calls stored in the module, -NO CALLS- appears on the display when you press a REVIEW button. • -END OF LIST- appears on the display when you reach the last stored call record while pressing the REVIEW...