Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Installation Instructions) model FS-5000_ (For ROM version; No.21 & AF board suffix no. -33) After Installation, if necessary, change system settings and adjust output power referring to pub. no. TI-E5519. Applicable to Antenna Coupler having serial number 1001 and after f FURUNO ELECTRIC CO., LTD. I NISHINOMIYA, JAPAN FURUNO ELECTRIC CO., LTD. 9-52, Ashihara-cho, Nishinomiya, Japan Telephone: Telefax: 0798-65-2111 0798-65-4200 !___Ajj_ LLgAt-?_r_e_sAr.v_e_d_____■ Printed in Japan FIRST EDITION Y1 MAY 1990 JUL. 3, 2002 (YOSH) PUB. No. OME-55190 FS-5000 00080214301 OME55190Y10 A SAFETY INSTRUCTIONS "DANGER", "WARNING" and "CAUTION" notices appear throughout this manual. It is the responsibility of the operator and installer of the equipment to read, understand and follow these notices. If you have any questions regarding these safei/ instructions, please contact a FURUNO agent or dealer. A DANGER This notice indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. A WARNING This notice indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. This notice indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury, or property damage. a SAFETY INFORMATION ¿IS FOR THE OPERATOR Do not open the cover of the equipment. This equipment uses high voltage electricity which can shock, burn, or cause death. Only qualified personnel should work inside the equipment. Do not dissasemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the ship's mains switchboard if water or foreign object falls into the equipment or the equipment is emitting smoke or fire. Continued use of the equipment can cause fire, electrical shock or serious injury. A CAUTION Do not place liquid-filled containers on the top of the equipment. Fire or electrical shock can result if a liquid spills into the equipment. Do not place heater near the equipment. Heat can melt the power cord, which can result in fire or electrical shock. Do not operate the unit with wet hands. Electrical shock can result. Use the correct fuse. Use of the wrong fuse can cause fire or equipment damage. WARNING Label attached A WARNING A To avoid electrical shock, do not remove cover. No user-serviceable parts inside. - - A. Name: Warning Label (1) Type : 86-003-1011-0 Code No. : 100-236-230 SAFETY INFORMATION FOR THE INSTALLER ^WARNING Only qualified personnel should work inside the equipment. This equipment uses high voltage electricity which can shock, burn, or cause death. Turn off the power at the ship's mains switchboard before beginning the installation. Post a warning sign near the switchboard to ensure that the power will not be applied while the equipment is being installed. Serious injury or death can result if the power is not turned off, or is applied while the equipment is being installed. A CAUTION o Ground the equipment. Ungrounded equipment can give off or receive electromagnetic interference or cause electrical shock. Confirm that the power supply voltage is compatible with the voltage rating of the equipment. Connection to the wrong power supply can cause fire or equipment damage. The voltage rating appears on the label at the rear of the equipment. TABLE OF CONTENTS SAFETY INSTRUCTIONS......................................................................i SHORTFORM INSTRUCTION...............................................................vil 2182 kHz DISTRESS CALLING.............................................................ix DSC DISTRESS CALLING.....................................................................x IN THE EVENT OF ANTENNA COUPLER FAILURE............................xi INTRODUCTION.....................................................................................xlii SPECIFICATIONS..................................................................................xv PRECAUTIONS .....................................................................................xviii SYSTEM CONFIGURATION..................................................................xix 1. OPERATION.......................................................................................1-1 CONTROLS.......................................................................................................1-2 TX Block Keys..................................................................1-2 RX Block Keys .................................................................1-4 Frequency Control Block Keys ....................................................1-7 Class of Emission/Time Setting Block Keys ..........................................1-8 BASIC OPERATION........................................................................................1-10 Turning the Power On And Off..........................