Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
3 3.0 FRONT PANEL DESCRIPTIONS ......................................................................... 4 4.0 REAR PANEL DESCRIPTIONS ........................................................................... 5 5.0 CONNECTING THE PFCTM 10 PROFESSIONAL MIDI FOOT CONTROLLER ...................... 6 5.1 With the Peavey Tube Fex'" or TransFexTM 212 ..................................... 6 5.2 With Other MIDI Equipment ........................................................... 6 6.0 USINGTHECONTROLLERWITH THETUBE FEXORTRANSFEX212 .......................... 6 6.1 Program Change Mode ................................................................... 6 6.2 Performance Tip/MIDI Mapping ....................................................... 7 6.3 Tuner Mode ................................................................................. 7 7.0 USING THE CONTROLLER AS ASTAND-ALONE MIDI CONTROLLER........................... 8 8.0 MIDI IMPLEMENTATION ................................................................................ 8 A Intended to alert the user to the presence of uninsulated “dangerou\ voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electnc shock to pcr\oni. A A Intended to alert the user of the presence of important operatmg and mamtenance (servicing) in\tructlons in the hteraturc accompanying the product. CAUTION: RiTk ot electrical shock - DO NOT OPEN! CAUTION: To reduce the risk of electric shock, do not remove cover No u\er servIceable part\ in\idc. Refer \ervlcing to qualified service personnel. WARNING: To prevent electrical shock or fire hazard, do not expose this appliance to rain or mol\ture. Before using thli appliance, read the operating guide for further warnings. Peavey Electronics Corporation PFC'" 20 Professional MIDI Foot Controller 1 .O INTRODUCTION Congratulations on your purchase of the PFCTM 10 Professional MIDI Foot Controller. This MIDI foot controlleris designed to operate as either a stand-alone MIDI program change and continuous controller,orin conjunction with the Peavey Tube Fex'" or TransFex'" 212 as an intelligent program change and continuous controller. 2.0 FEATURES l 11 buttons l 20-character by 2-line LCD display l 2 inputs for Control Voltage pedals l Full MIDI compatibility (5 pin or 8 pin) l "1ntelligent"operation when used with the Peavey Tube Fex(version 1.2 and higher)orTransFex212 l Chromatic tuner displayed on the foot controller's LCD l Phantom power is supplied to the PFC 10 from the Tube Fex or TransFex 212 via the supplied 8-pin MIDI cable Peavey Electronics Corporation PFC” IO Professional MIDI Foot Controller Display Tuner LED B,mk/Tuner Button I I I I I Bank/Program Numbered Button Program LED 3.0 FRONT PANEL DESCRIPTIONS 1. Display This is a 20-character by 2-line Liquid Crystal Display (LCD) with variable view angle adjustment for easy visibility. 2. Tuner LED Blinking red indicates that the tuner is active. 3 . Bank/Tuner Button Pressing the Bank/Tuner button once selects Bank mode. Then, pressing a "Numbered" button once selects a Bank. Pressing the Bank/Tuner button twice selects Tuner mode.The LED will begin blinking indicating that thetuneris active. Once tuning has been completed, pressing any switch will return youtothe active program. 4 . Bank/Program Numbered Buttons The Bank/Program numbered buttons are used to select the bank and programs. 5. Program LEDs Indicates the active program. Peavey Electronics Corporation PFC'" 10 Professional MIDI Foot Controller View MIDI/ Control Angle Remote Voltage Adjust OutJcd Jarits 4.0 REAR PANEL DESCRIPTIONS 1. Power Supply Required when using a 5-pin MIDI cablewith MIDIequipment otherthan theTube FexorTransFex 212. Use onfy the 16-16.5 volt AC 1,000 mA adaptor, Peavey part#70900660, available as an option. Caution: Use only the optional16.5 volt power supply for this product. If the (optional) power supply must be replaced, consultan Authorized Peavey Dealer or the factoryforthe correct replacement. Failure to use the correctpowersupply could resultin fire,shock hazard,extensive circuitdamage,decreased performance, and/or non-operation. 2. View Angle Adjustment This adjusts the view angle of the LCD display to provide the most comfortable viewing angle. 3. MIDI/Remote Out Jack Used when connecting to an effects unit. Use a standard 5-pin MIDI cable with effects units other than the Peavey Tube Fex or TransFex 212. When using the Tube Fex or TransFex 212, use the 8-pin MIDI cable provided.This willallow you to usethe PFClO ProfessionalMID Foot Controller’s "intelligent" operation, and it will connect the PFC 10 to the Phantom power supplied from the Tube Fex or TransFex 212. 4. Control Voltage Jacks The CC6jacktransmits Controller 6 when used with a CV pedal or potentiometer. Use the CC7jackto transmit Controller 7 (volume) when used with a CV pedal or potentiometer. Peavey Electronics Corporation PFC‘" 10 Professional MIDI Foot Controller 5.0 CONNECTI...