Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
The intercom uses digital signals to control the stations called and provide a unique “house code” that prevents other nearby intercoms from accessing the system. Either of two radio frequencies can be selected for the intercoms to further eliminate the chance of interference from adjacent systems. The Console features five station number pushbuttons for selecting the party to call. The ALL CALL button can be used to call all stations. Pressing the TALK button calls the selected station, then controls the direction of the conversation. Each intercom user presses their TALK button to activate the microphone during the conversation. The Doorbell works as Console station 4 or 5. Pressing the Doorbell’s TALK button sounds a “ding-dong” (station 5), or “dong” (station 4) at the Console, then the conversation begins by pressing the units’ talk buttons. For privacy, a MUTE switch on each Console can be set to prevent Wireless Doorbell tones and ALL CALL messages from sounding through that Console’s speaker. The Console can be placed on a table or shelf, or mounted to a wall with the screws provided. The antenna adjusts for table or wall mounting. Power for the Console is provided by a plug-in transformer. The Doorbell attaches to a wall with the mounting plate provided. Two 9-volt alkaline batteries power the Doorbell intercom. CONSOLE FEATURES 31 2 4 5 6 7 89 10 11 12 1. STATION INDICATORS Indicators light when a station number button is pressed to show the station that will be called. Indicators light to show who called or a call in progress. Indicators flash during conversation to show the busy stations. 2. STATION BUTTONS Press a button to select the intercom station to be called. 3. STATION LABEL AREAS For applying labels that identify the intercom station locations. 4. ANTENNA Receives and sends the wireless intercom signals. Antenna pivots for Console horizontal and vertical mounting. 5. SPEAKER Sounds audio from the calling station. Volume is adjustable with the volume control. 6. POWER INDICATOR Lights to show that Console power is switched on. 7. VOLUME CONTROL - POWER SWITCH Switches Console power ON & OFF. Adjusts the volume of the Console’s speaker. 8. MICROPHONE High-gain microphone monitors audio from the calling station while the Console’s TALK button is pressed. 9. TALK BUTTON Press and hold to talk to the selected station. 10. ALL CALL BUTTON Press and hold to talk to all stations. 11. MUTE SWITCH When ON, the Console will not sound Doorbell Intercom chime tones or respond to All Call signals. 12. FREQUENCY SWITCH Selects frequency A or B. All intercoms used in the same system must be set to the same frequency. DOORBELL FEATURES 1 2 3 4 5 6 7 91011 8 12 1. MICROPHONE High-gain microphone monitors audio while the Doorbell’s TALK button is pressed. 2. SPEAKER Sounds audio from the intercom Console. Volume is adjustable with the volume control (see Item #6). 3. POWER INDICATOR Lights to show that Doorbell power is on. Doorbell power automatically switches ON when TALK button is pressed. The power automatically switches OFF 25 seconds after the last intercom communication. 4. DOORBELL-TALK BUTTON Press to turn ON the Doorbell power and sound the chime at all of the intercom Consoles (Consoles with their MUTE switch ON will not sound the Doorbell chime). During intercom conversation, press and hold the DOORBELL-TALK button while speaking. 5. BATTERY CLIPS For connection to two 9-volt alkaline batteries. 6. VOLUME CONTROL Sets the volume level of the Doorbell’s speaker. 7. BATTERY DOOR Slides off rear case to expose the battery compartment, FREQUENCY switch, and STATION switch. 8. MOUNTING PLATE Mounts the Doorbell to a wall or single-gang outlet box. 9. PROGRAM BUTTON Press to cause the Doorbell to enter program mode. 10. FREQUENCY SWITCH Sets the Doorbell to frequency “A” or “B”. All intercoms used in the same system must be set to the same frequency. 11. STATION SWITCH Sets the Doorbell to station 4 or 5. When set for station 5, the Doorbell will sound a “ding-dong” chime at the Console. When set for station 4, the Doorbell will sound a “dong” chime at the Console. 12. CASE LOCKING SCREW Secures the Doorbell to the mounting plate. PREPARE CONSOLE & ANTENNA FOR TABLE OR SHELF MOUNTING... FOR WALL MOUNTING... SWING ANTENNA ALL THE WAY UP POINT ANTENNA STRAIGHT UP FROM CASE SWING ANTENNA OUT FROM BOTTOM OF CASE 1 PREPARE THE ANTENNA PLUG IN CONSOLE(S) TRANSFORMER CONNECT DOORBELL(S) BATTERIES CONSOLE DOORBELL LABELS ARE SUPPLIED TO IDENTIFY STATION LOCATIONS FACTORY SETTING: CONSOLE STATION #1 DOORBELL STATION #5 2 PREPARE CONSOLE AND DOORBELL WALL MOUNTING THE DOORBELL 3 1 2 4 USE MOUNTING PLATE AND PENCIL TO MARK SCREW LOCATIONS ATTACH MOUNTING PLATE USING THE SCREWS PROVIDED TILT DOORBELL INTO MOUNTING PLATE SECURE DOORBELL TO MOUNTING PLATE WITH THE CASE LOCKING SCREW NOTE: WAIT UNTIL AFTER ADJUSTING THE DOORBELL AUDIO VOLUME BEFORE FULLY TIGHTENING THE LOCKING SCREW NOTE: DO NOT MOUNT THE DOORBELL...
Dieses Handbuch ist für folgende Modelle:Telefonanlagen - WHI-5S (1.68 mb)