Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Note: You may need to purchase additional software. 4Ensure you have the NVIDIA 3D glasses and IR-transmitter. Setting up a 3D environment Once you have installed the drivers, you will need to set up the environment. 1Position the infra-red transmitter so that it has maximum coverage. The transmitter controls the 3D glasses and is necessary to view 3D content. Plug the USB cable in to an available USB port on your computer. 2Right-click anywhere on the desktop and select NVIDIA Control Panel. This will open the setup Wizard if you haven’t previously set up the 3D environment. 3Follow the onscreen instructions to set up the 3D environment. 4Check the Enable Stereoscopic 3D option and select the correct display type. 5In the Select a task... list, select Change Resolution. Make sure the refresh rate of the display has been set to 120Hz (from the appropriate drop-down menu). If you are viewing Blu-ray 3D content over an HDMI 1.4a or later connection, this will be set automatically. 6Press the menu button on the projector remote control to open the OSD. Select the Image section (second menu option) on the left-hand side of the window. 7Set 3D Glasses to Nvidia 3D Vision. 8Alternatively, press the Empowering Key on your projector’s remote control to open Acer eView Management. From the 3D options, select Nvidia 3D Vision. Using the stereoscopic player You need to have a stereoscopic player in order to view 3D content. The instructions below explain how to view 3D content using the Stereoscopic player that is available at Other players may have different procedures. 1Open the stereoscopic player and set the viewing method by going to View > Viewing Method > NVIDIA 3D Vision. 2Open the 3D content in the player. Note: You need to view content at fullscreen resolution in order to get the 3D effects. Using DLP 3D technology Also available with NVIDIA 3DTV Play ready projectors when using DLP 3D glasses. Before you can enjoy the benefits of the DLP 3D technology, you will need to do the following. 1Ensure your graphics card supports 3D playback. Note: Please refer to your graphics card’s documentation. 2Download and install the latest drivers for your graphics card. Note: Please refer to your graphics card vendor’s website for the latest driver version. 3You should also download a suitable 3D player such as the one available from To download software and use an NVIDIA 3DTV Play ready projector with DLP glasses, refer to the NVIDIA 3DTV website: Note: You may need to purchase additional software. 4Ensure you have the correct DLP-compatible 3D glasses. Setting up a 3D environment Once you have installed the drivers, you will need to set up the environment. 1Set the refresh rate to 120 Hz on your graphics card. If you are viewing Blu-ray 3D content over an HDMI 1.4a or later connection, this will be set automatically. 2Press the menu button on the projector remote control to open the OSD. Select the Image section (second menu option) on the left-hand side of the window. 3Set 3D Glasses to DLP 3D. 4Alternatively, press the Empowering Key on your projector’s remote control to open Acer eView Management. From the 3D options, select DLP 3D. 5If you find that the 3D content is not displaying properly, try selecting 3D Sync Invert from the projector OSD or Acer eView Management. Important: If you have an NVIDIA graphics card and the NVIDIA 3D Vision drivers installed, you may need to disable the Stereoscopic feature to use the DLP 3D technology. Using the stereoscopic player You need to have a stereoscopic player in order to view 3D content. The instructions below explain how to view 3D content using the Stereoscopic player that is available at Other play...
Dieses Handbuch ist für folgende Modelle:Projektoren - K330 (1.19 mb)
Projektoren - P1201B (1.19 mb)
Projektoren - P1203PB (1.19 mb)