Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Samsung Dateigröße: 1.33 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Projektoren - SP-L350W (1.35 mb)

Projektoren - SP-L350W (1.39 mb)

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system. | Product Features | Product Views | Remote Control | Product Specifications | An optical engine adopting new LCD technology -1024 x 768 panel has been adapted. -Utilizes a 3P-LCD panel. -SP-L330: Provides a bright screen of 3300 lumen. SP-L350: Provides a bright screen of 3500 lumen. -Compact size, lightweight, and good portability Minimized fan noise - Minimizes the noise generated by the product’s fan by optimizing the internal air flow and fan installation structure. Various input terminals - Increases the connectivity to peripherals by providing various terminals, such as HDMI (DVI PC signal, supported), 2 D-Sub 15p, S-Video, and Video terminals. Audio Output - There are two speakers and a 5-band equalizer. User adjustments - This unit allows adjustment of each input port. - The unit has a reference pattern that can be used for positioning and adjustment. | Product Features | Product Views | Remote Control | Product Specifications | Front/Upper Side 1. Indicators -STAND BY (Blue LED) - LAMP (Blue LED) - TEMP (Red LED) . Refer to the LED Indications. 2. VOL - / + & Select and Move Button Adjusts the volume. Use this button to move to or select an item within a menu. 3. MENU Button Use this button to enter or exit a menu or to move forward in a menu. 4. SOURCE Button Used to select input signals from the external sources. Unpacking 5. POWER( ) Button Used to turn the projector on or off. 6. Lens 7. Remote Control Signal Receiver 8. Focus Ring Used for Focus Adjustment. 9. Zoom Knob Used to enlarge or reduce image size. 10.Lens cover Warranty Card/ Registration Card Quick Installation Guide User Manual CD (Not available in all locations) Remote Control/ 1 Batteries (CR2025) Power Cable Cleaning Cloth (Not available in all locations) D-Sub Cable LED Indications :Light is On :Light is Blinking :Light is Off STAND BY LAMP TEMP Information 00 If you press the POWER button on the remote control or projector, the screen appears within 30 seconds. 0The projector is in normal operating condition. 0 This state appears when the projector is preparing an operation after the POWER button on the projector or the remote control has been pressed. 00 The POWER button is pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Operates for about 30 seconds.) 0 Refer to Action 1 below if the cooling fan inside the projector is not in normal operation condition. 0Refer to Action 2 below if the lamp cover protecting the lamp unit is not closed properly. This indicates that the lens cover does not open completely. Refer to Action 3 below. This indicates that it has changed to Cooling mode, because the internal temperature of the projector has increased beyond the maintenance limit. Refer to Action 4 below. 00 This indicates that the power is turned off automatically because the internal temperature of the projector has increased beyond the operation limit. Refer to Action 5 below A problem has occurred with the operation of the lamp. Refer to Action 6. The lifetime of the lamp has expired. Refer to Action 7. The power for the product is not operating normally. Contact a service center. Clearing Indicator Problems Classification State When the cooling fan Action 1 system is not in normal operating condition. When the lamp cover protecting the lamp unit is Action 2 not properly closed or the sensor system is not in normal operating condition. The lens cover is not open Action 3 completely. Measures If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center. Check if the screws on the side of the projector are securely tightened. If they are and the indicators are still lit, contact your product distributor or a service center. Open the lens cover completely. If the lens cover is not open completely while operating the projector, both the video and audio are turned off automatically. If the lens cover remains not completely open for ten minutes, the projector is turned off automatically. If the internal temperature of the projector has increased beyond the operation limit, it is changed to Cooling mode before it is turned off automatically. * Cooling mode: The fan speed has increased and the lamp of the projector has been changed automatically to ECO mode. Check whether the ventilating hole of the projector is blocked. Check whether the air filter is blocked. Clean it if it is blocked. Check whether the surrounding temperature of the projector is higher than the standard temperature range of the projector. Cool the projector sufficiently and operate it again. Check whether the ventilating hole of the projector is blocked. Check whether the air filter is blocked. Clean it if it is block...

Herunterladen

Geben Sie zwei Ziffern: