Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• The main power supply is not being supplied to the wall outlet. • TEMP indicator is illuminated or flashing. (Refer to page 40.) • LAMP indicator is illuminated or flashing. (Refer to page 40.) • The lamp unit cover has not been securely installed. No picture appears. !l ! • The video signal input source may not be connected properly. • The input selection setting may not be correct. (Refer to page 22.) • The BRIGHT adjustment setting may be at the minimum possible setting. (Refer to page 30.) • The shutter function may be in use. (Refer to page 35.) The picture is fuzzy. • The tens cover may still be attached to the lens. • The lens focus may not have been set correctly. (Refer to pages 22 and 23.) • The projector may not be at the correct distance from the screen. (Refer to pages 20 and 21.) • The lens may be dirty. • The projector may be tilted too much. (Refer to page 23.) COLOR is too light or TINT is poor • COLOR or TINT adjustment may be incorrect. (Refer to page 30.) • The input source which is connected to the projector may not be adjusted correctly. No sound can be heard. • The audio signal source may not be connected property. • A cable may be connected to the AUDIO OUT jack. • The volume adjustment may be at the lowest possible setting. (Refer to pages 15 and 25.) 46 Problem Possible cause Remote control unit does not operate. • The battery may be weak. • The battery may not be inserted correctly. (Refer to page 16.) • The remote control signal receptor on the projector may be obstructed. (Refer to page 16.) • The remote control unit may be out of the operation range. (Refer to page 16.) The picture does not display correctly. • The correct input signal may not be selected. (Refer to page 22.) • The signal format (TV system) may not be set correctly. (Refer to page 31.) • There may be a problem with the video tape or other signal source. Picture from computer does not appear • A signal which is not compatible with the projector may be being input. (Refer to page 50.) • The cable may be too long. • The external video output for the notebook computer may not be set correctly. 47 Others Specifications Power supply: Power consumption: * Amps: LCD panel: Panel size (diagonal): Aspect ratio: Micro lens array: PT-L711U: PT-L701U/PT-L501U: Display method: Drive method: Pixp|c’ PT-L711U/PT-L701U: PT-L501U: Lens: Lamp: ( Luminosity: PT-L711U: PT-L701U: PT-L501U: 100 V—240 V 50 Hz/60 Hz 240 W (During standby (when fan is stopped): Approx. 5 W-10 W) 2.8 A-1.0 A 0.9 type (22.86 mm) 4:3 (16:9 compatible) Available Not available 3 transparent LCD panels (RGB) Active matrix method 786 432 (1024 x 768) x 3 panels 480 000 (800 x 600) x 3 panels Manual zoom (1 -1.3) / focus lens F 1.8 - 2.1, f 28.7 mm - 36.0 mm UHM lamp (160 W) 1400 I m/ANSI 1000 I m/ANSI 1100 I m/ANSI Scanning frequency(for RGB signals): PT-L711U PT-L701U PT-L501U Horizontal scanning frequency 24 kHz -97 kHz 24 kHz -81 kHz Vertical scanning frequency 50 Hz -120 Hz 50 Hz -120 Hz Dot clock frequency 135 MHz or less 110 MHz or less YPbPr signals: NTSC (480i), 480p, PAL (625i), 720p, HDTV (1080i/1035i) Color system: 6 (NTSC/NTSC 4.43/PAL/PAL-M/P AL- N/SECAM) Projection size: 762 mm - 7620 mm (30" - 300') Throw distance: 1.1 m -11.7 m (3'8"- 38'4") Optical axis shift: 9:1 (fixed) Screen aspect ratio: 4:3 Installation: Front/Rear/Ceiling/Desk (Menu selection method) Speakers: 2.8 cm round x 2 Max. useable volume output: 2 W (1 W + 1 W) (stereo) 48 Connectors RGB IN: During YPbPr input: Y: Pb,Pr : During RGB input R.G.B.: G.SYNC: H D/SYNC: VD: AUDIO IN (for RGB): VIDEO IN: S-VIDEO IN: AUDIO IN (for S-VIDEO/VIDEO) AUDIO OUT: Serial connector: Cabinet: Dimensions: Width: Height: Length: Weight: Operating environment: Temperature: Humidity: Certifications:
Projektoren - PTL701U (1.93 mb)
Projektoren - PTL711U (1.93 mb)