Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
When using the Power Mop, be sure to read cleaning product labels for any Proposition 65 warnings. Follow directions on containers of all such products. WARNING: INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS • Close supervision is necessary when any appliance is used near children. Do not allow to be used as a toy. • Never spray towards your face or in the direction of another person. • Never place your mouth on the nozzle or attempt to prime the sprayer by sucking through the nozzle. • DO NOT SPRAY GASOLINE, SOLVENTS, ACIDS, CAUSTICS, POISONS, OILS, FLAMMABLE LIQUIDS OR SIMILAR PRODUCTS. Personal injury could result from burns, fire, or inhalation of or contact with such liquids. • Do not operate in the presence of explosives and/or flammable fumes or liquids. • Always wear eye protection when using the Power Mop with irritating substances. You may also want to use rubber gloves. Read and follow manufacturer’s instructions on the cleaning agent you use. • Never use this product over your head. • Always store unit indoors. • Keep hair, loose clothing, jewelry, and all parts of body away from moving parts. • Do not insert attachments/accessories when unit is running. • Store out of reach of children. • This appliance is intended for household use only and not for commercial or industrial use. • Use only as described in this manual. Use only Black & Decker recommended attachments. • Use extra caution when cleaning on stairs. • Keep work areas well lit. • Do not use to absorb or scrub any toxic substances, flammable or combustible liquids such as gasoline or use in areas where they may be present. • Do not use without Scrub Brush and Cleaning Pad installed. • Any electronic or electrical appliance should not be stored in or exposed to areas of high heat or humidity. Do not store your Power Mop close to stoves, radiators, furnaces or in a bathroom or bathing area. • Do not contact moving parts. Catalog Number: PM1000 FORM NO. 90503695 REV. 1 PRINTED IN CHINA Copyright © 2007 Black & Decker (MAR. ‘07) VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. INSTRUCTION MANUAL CONSERVER LE PRESENT GUIDE A TITRE DE REFERENCE. Key Information You Should Know • Use only Household Cleaners that are “water like” and are appropriate for the types of floors you are cleaning. Do not use cleaners with pine agents or other oil based products. • Install Cleaning Pad and Scrubbing Brush before use. • Use only with AA alkaline batteries. Catalog Number: PM1000 SAVE THIS MANUAL FOR FUTURE REFERENCE. BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1-800-544-6986 BEFORE YOU CALL, HAVE THE CATALOG No. AND DATE CODE AVAILABLE. IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US ACALL. YOUR FEEDBACK IS VITALTO BLACK & DECKER. THANK YOU FOR CHOOSIING BLACK & DECKER!! GO TO WWW..BLACKANDDECKER..COM//NEWOWNER TO REGIISTER YOUR NEW PRODUCT.. POWER MOP Functional Description 1. Main Unit 2. Handle Section 3. Thumb Screw 4. Batteries 5. Brush 6. “No Touch” Cleaning Pads 7. Pad Holder 1 3 1 2 3 4 5 6 7 X 3 Description fonctionnelle 1. Unite principale 2. Section de la poignee 3. Vis de serrage 4. Piles 5. Brosse 6. Tampons nettoyants « sans mains » 7. Porte-tampon Descripcion de las funciones 1. Unidad principal 2. Seccion del mango 3. Tornillo de ajuste 4. Baterias 5. Cepillo 6. Almohadillas de limpieza “No Touch” 7. Sujetador de almohadillas To purchase a box of replacement “No Touch” Cleaning Pads (Model #PM-DP) or a replacement brush, call 1-888-678-7278, see fig. 2 (6). 2 4 5 7 Mop Mode Scrubbing Mode 2 1 6 1 2 8 9 2 11 10 3 12 13 5 7 14 52” min 132 cm 10 11 1” 25 cm 8 SAVE THESE INSTRUCTIONS INSTALLATION INSTRUCTIONS Features * Depending on model purchased, your unit may not appear exactly as shown. * BEFORE FIRST USE remove all components from the packaging and familiarize yourself with them to help you with the assembly and operation of your Power Mop. Assembling the Power Mop Unit • Snap Yoke Rod (8) into the Conversion Bar Link (9) as shown in Fig. 2. • Install the Handle Section (2) by ensuring that the Connector Key (10) matches the shape of the Notch in the Main Unit Tube (11) before inserting and snapping in place. Push Handle Section until you hear a “click” sound to ensure it is properly assembled with Main Unit Tube. (see Fig. 3) • Unscrew Thumbscrew (3) from Slider (12) and insert Conversion Bar (13) into Slider as shown in Fig. 4. Re-install Thumbscrew and hand tighten. • Install the Brush (5) by lining up the shape of the end of the accessory with the shaft and push it on, until it snaps in place. See Fig. 5 for reference. To remove the Brush, simply pull it off. WARNING: Do not attach/remove accessory when unit is running. • Convert the unit from Scrubbing Mode to Mop Mode as shown in Fig....