Login:
Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Campbell Hausfeld, modell KTV008

Hersteller: Campbell Hausfeld
Dateigröße: 215.84 kb
Dateiname: b4635752-dfd0-4173-a7f0-bed96ca8ab62.pdf
Unterrichtssprache:enesfr
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Follow all instructions. MANUAL • Only persons well acquainted with these rules of safe operation should be allowed to use the unit. Never fill the tank ! DANGER above 125 psi. Personal injury or property damage could occur. Never fill from ! DANGER bottled gas or any air system which produces over 150 psi. • Do not alter or tamper with the safety relief valve. In the event that the safety relief valve is tampered with, existing warranties shall be voided and Campbell Hausfeld disclaims any liability whatsoever for any loss, personal injury or damage. • This tank is stamped with a “DISCARD AFTER” date located on the handle. Discard tank and do NOT use after this date has passed. Replace with new tank. NEVER ! DANGER attempt to repair or modify a tank. Welding, drilling or any other modification will ! DANGER Breathable Air Warning This tank is not equipped and should not be used to supply breathing quality air. DISCLAIMER OF WARRANTIES In the event the tank is used for the purpose of breathing air application, existing warranties shall be voided, and Campbell Hausfeld disclaims any liability whatsoever for any loss, personal injury or damage. weaken the tank resulting in damage from rupture or explosion. Always replace worn, damaged or cracked tanks. • Release air pressure from air tank by pulling safety relief ring before servicing or replacing parts. ! WARNING Wear ANSI Z87.1-approved safety glasses during operation to avoid eye injury. • For dry air only. Do not use to store or disperse liquids or flammable gases. • Store inside. Do not store outside or in direct sunlight. • Only use attachments rated at 150 psi minimum. • Check air hoses for weak or worn condition before each use. Make sure all connections are secure. REMINDER: Keep your dated proof © 2004 Campbell Hausfeld/Scott For parts, product & service information IN287000AV 6/04 visit Operating Instructions General Safety Information (Cont.) Use only genuine ! WARNING Campbell Hausfeld replacement parts and accessories when servicing unit. Failure to do so could result in death or serious injury. Assembly The air hose is supplied loose to prevent damage during transit. Use 9/16” open end wrench to attach thread-sealed 1/4” NPT male hose end to air outlet on manifold (opposite filler valve). Tighten just to finger tight then turn 2-3 more times. Operation • Pull safety relief valve before filling to be sure the valve moves freely. 1. Take portable tank to a source of clean, dry, compressed air (ie. full service gas station, truck stop etc. Some modern convenience stations do not have sufficient pressure to fill the tank). The recommended fill pressure is between 85 and 125 psi. 2. Press chuck from air source onto filler valve located on the side of the brass manifold (See Figure 1). Fill tank to a maximum of 125 psi as indicated on pressure gauge. The safety relief valve is preset to 135 psi to prevent overfilling. Do not rely on safety relief valve Figure 1 Pressure Gauge Manifold Air Shutoff Safety Relief Valve Filler Valve ! WARNING to indicate when tank is full. NOTE: The air shut-off valve (red knob) does not have to be opened to fill the tank. 3. Inflate object by locking universal adapter onto valve stem. Be sure to press universal adapter down over valve stem threads completely. When universal adapter is firmly in place, press locking lever down to lock onto valve stem (see Figure 2). Lock Universal Adapter Valve Stem Figure 2 NOTE: The universal adapter does not have a valve. The air flow is controlled by the air shutoff valve on the manifold. 4. Open air shut-off valve by turning counterclockwise to allow air to flow into hose. The tank manifold ! WARNING gauge does not indicate the pressure in the object being filled. Use a separate gauge to check the object. 5. Turn the air shut-off valve clockwise to the closed position before unlocking universal adapter from valve stem to prevent air leaks from the hose. Do not over tighten. Maintenance Accumulated ! WARNING moisture must be drained from tank regularly to prevent rusting. Failure to do so wil...

Dieses Handbuch ist für folgende Modelle:
Andere persönliche Geräte - FHV009 (215.84 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien