|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Note: Does this system receive notifications from more than one system? Ensure you enter the updated information on all affected systems. To modify system information: 1 In the Enterprise View, select the system you want. 2 On the tool bar, click Configure, point to the system, then click Notifications. The Notifications Manager opens. 3 Select the system you want to modify. 4 In the System Properties window, enter the new information or select a new notification level in the Event Type drop-down menu, then click OK. Or, In the tool bar, click Delete system, then click Yes to confirm the deletion. Modifications become effective immediately. If you have deleted a system but you still want to be notified about status and activity by logged notifications, ensure that there is at least one system on the Notifications list. (See page 98 to add a new system.) Chapter 9: Monitoring Status and Activity . 102 Disabling Logged Notifications Logged notifications are enabled by default. You can choose disable them on a selected system, if required. Note: If you disable logged notifications, events will be generated for that system but not broadcast—not even to the local Event Log. To disable logged notifications: 1 In the Enterprise View, select the system you want. 2 On the tool bar, click Configure, point to the system, then click Notifications. The Notifications Manager opens. 3 On the menu bar, click Actions, then click Disable notifications. (See the illustration in Step 4 on page 100, if required.) Event notifications are disabled. The Notifications tab (shown at right) shows the red ‘disabled’ icon. Re-enabling Logged Notifications To re-enable logged notifications, repeat steps 1 and 3 in Disabling Logged Notifications, selecting Enable Notifications during Step 3. Clearing the Notifications Manager Log The bottom panel of the Notifications Manager displays status information and messages about the Notification Manager itself, such as whether notifications were sent successfully or not. To make it easier to monitor recent events, you can clear the log on a selected system. To clear the Notification Log: 1 In the Enterprise View, select the system you want. 2 On the tool bar, click Configure, point to the system, then click Notifications. The Notifications Manager opens. 3 On the menu bar, click File, select Clear the event log, then click Notifications. Click Yes to clear the log. The log is cleared. Chapter 9: Monitoring Status and Activity . 103 Notifying Users by Email About Status and Activity You can set up Adaptec Storage Manager to send email messages (or notifications) to a selected email address when an event, such as the creation of a pool or the failure of a disk drive, occurs on a system. Email notifications can help you monitor activity on your entire storage space from any location, and are especially useful in storage spaces that include multiple systems running the Adaptec Stora...