Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Adaptec Array1000CA Family Array Management Guide ¦ Maximum/Minimum Stripe Size: lists the range of data and parity stripe sizes that the product supports. ¦ Spare Pool: indicates that the product supports using spares from a spare pool. Click Close to close the Capabilities dialog box and the Controller Information dialog box. Viewi ng Cha nn el I n f o r m a t ion When you double-click a channel icon , the Channel Information dialog box appears, as shown in Figure 4-4. Figure 4-4. Channel Information Dialog Box The following information appears in the Channel Information dialog box: ¦ Status: current operational status of the channel (for example, Active, Inactive). ¦ Channel type: type of this channel—for example, SCSI. ¦ Maximum Devices: maximum number of SCSI devices that the channel supports. If this number is 16 (for example) it means you can connect up to 15 devices, since the channel itself counts as one device. ¦ Current Devices: number of SCSI devices currently connected to the channel. Click Close to close the Channel Information dialog box. Viewing Array, Device, and System Information Viewi ng SCS I D e v i ce In f orm ati o n When you double-click a SCSI device icon, such as a disk or a CD-ROM drive , the SCSI Information dialog box appears, as shown in Figure 4-5. Figure 4-5. SCSI Information Dialog Box The information in this dialog box is self-explanatory. When you are creating an array you can view this dialog box to determine if a disk you want to use for the array has partitions on it. Simply click the Check Partitions button. A small popup box indicates whether the selected disk has a partition and whether the partition is visible to the operating system. Not e : You cannot use a disk in an array if it has a partition that is visible to the operating system. (This is a safety feature that prevents you, for example, from accidentally erasing your boot disk.) If you really do want to use a disk with a recognized partition in the array, exit from Adaptec CI/O Workstation Array Management Software, back up any data you want to keep, delete the partition, and then run Adaptec CI/O Workstation Array Management Software again. Adaptec Array1000CA Family Array Management Guide Click the Blink Drive Light button if you are not sure which physical device the icon represents. The light on the front of the drive will flash briefly. (This option is not available for other kinds of SCSI devices, such as CD-ROM drives.) Click Close to close the SCSI Information dialog box. Res c a nni ng the Com pu ter Whenever you boot your computer the operating system software scans for installed devices such as arrays and SCSI devices. Adaptec CI/O Workstation Array Management Software displays icons for these devices in the Storage Configuration window. Sometimes you need to issue a Rescan command while Adaptec CI/O Workstation Array Management Software is running so it can “see” a new hardware co...