Before starting to work always check that the chisel or drill bit is properly locked in the chuck. • Examine the chuck regularly for signs of wear or damage. Never start up a rotary hammer tool until it is pressed against a work piece(bracket, wall, ceiling, etc). 6 • Wear work gloves to protect fingers from bruising and abrasions. • Always check walls and ceilings for position of hidden power cables, pipes etc. A metal detector can be obtained from any good DIY store for this purpose. • Wear ea
Do not carry a plugged in tool with your finger on the switch. 16. Use outdoor rated extension cords. When a tool is used outdoors, use only extension cords that are intended for outdoor use and are so marked. 17. Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired. 18. Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly damaged, carefully determine if it will operate properly and perform it
General safety instructions To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards. Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you obse
A combination of Carbon Fibre and Magnesium construction offers the very latest in manufacturing materials that maximise strength and durability in a lighter powertool. An increased range of applications are made possible by the 3 modes of operation including Non Impact drilling, Impact Drilling and Stop Rotationwhich is used for chiselling to remove tiles and the breaking up of concrete. SDS Plus bit fitment provides for a reliable and fast method of fitting your accessories while safety featur
Use of the power tool for operations different from intended could result in a hazardous situation. Service • Have your power tool serviced by a qualified repair personnel using only identical replacement parts. • When operating a power tool outdoors, use an outdoor extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. This will ensure that the safety of the power tool is maintained. Additional safety instructions for engravers • Alwa
Accessories The GMC DEC005GG comprises the following components: 1 x Instruction manual 10 x Glue sticks (150mm x O11mm) Operation WARNING. Before connecting a tool to a power source, be sure that the voltage supply is the same as that specified on the nameplate of the tool. A power source with a voltage greater than that specified for the tool can result in serious injury to the user, as well as damage to the tool. If in doubt, do not plug in the tool. Using a power source with a voltage less t
• Do not vacuum anything that is burning or smoking, such as cigarettes, matches, or hot ashes. • To avoid health hazards from vapors or dust, do not vacuum toxic materials. • Do not use or store near hazardous materials. • Do not use outdoors or on wet surfaces. • Put unit on a stable surface. • Route vacuum hose and electric cord out of traffic areas. • To avoid injury from accidental starting, unplug power cord before changing or cleaning filter/dust bag or chip bag. • Do not use without filt