MODEL G9975 2 HP DUST COLLECTOR Product Dimensions: Weight................................................................................................................................................................92 lbs. Length/Width/Height.................................................................................................................33-1/2 x 21-1/2 x 78 in. Foot Print (Length/Width).......................................................................................

1654 CFM Maximum Static Pressure.........................................................................................................................2.0 in. Max Static Pressure................................................................................................................................14.2 in. Main Inlet Size..............................................................................................................................................8 in. Maximum Material

63 x 56-7/8 in. Shipping Dimensions: Carton #1 Type...................................................................................................................................................Cardboard Content..................................................................................................................................................Machine Weight........................................................................................................................

MODEL G0562 3 HP DOUBLE CANISTER DUST COLLECTOR Product Dimensions: Weight..............................................................................................................................................................187 lbs. Length/Width/Height.......................................................................................................................57-7/8 x 32 x 71 in. Foot Print (Length/Width)......................................................................

1/09 and Later) T21323 Labels REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PLABEL-12C READ MANUAL LABEL 102 PT21323102 CRUSHING INJURY LABEL 103 PLABEL-11B SAFETY GLASSES LABEL 104 PT21323104 GRIZZLY DOMED LABEL 105 PT21323105 MACHINE ID LABEL AWARNING Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE t

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIzzLY INDUSTRIAL, INC. #TS11343 PRINTED IN TAIWAN

When the lid is closed, tabs in the lock bar engage the pockets on the drawers. When the lid is open, the tabs are raised clear of the pockets. Important: The drawer must be fully closed before the lid is shut. DO NOT slam the drawers when the lid is shut; they will not lock and damage to lock bar tabs or lock pockets may occur. Should this happen, remove the drawer and straighten out the deformed tab with a screwdriver. For the lock pockets, a pair of pliers should be used. See (1A) lock bar t

shipping weight). DO NOT over-exert yourself while unpacking or moving your machine—get assistance. Assembly Insert a handle into each socket (Figure 1). Operation 1. Cut the logs you want to split to 175/8" or less to fit into the splitter. 2. Turn the release knob (Figure 2) counterclockwise to retract the piston rod fully into the cylinder, then turn the knob clockwise. Awarning Keep hands and other body parts away from wedge and piston rod when H6239 is in operation to prevent serious

-2- G1032 Dust Collector 12. SECURE WORK. Use clamps or a vise to hold work when practical. It’s safer than using your hand and frees both hands to operate tool. 13. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 14. DISCONNECT TOOLS before servicing and changing accessories, such as blades, bits, cutters, and the like. 15. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off pos