Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Makita Dateigröße: 76.24 kb Dateiname: Unterrichtssprache:

2) The adhesive, Three Bond 1342 has been added on three spots of the thread of Tool Holder as illustrated below to prevent Tool Holder from loosening. 3) In accordance with the modifications of 1) and 2), Tool Holders / Tool Holder Assemblies for repairing of the subject Models have been changed to Tool Holder Sets. These Tool Holder Sets additionally include each one piece of Flat Washer 43 (Part No.267203-1) and O ring 38 (Part No.213508-7), which might necessarily be replaced whenever Tool Holders / Tool Holder Assemblies are replaced in repairing. See the column of Interchangeability for Part Nos. of Tool Holder Sets. Where Flat Washer 43 Is Placed and Three Bond 1342 Is Applied Tool Holder Three Bond 1342 Flat Washer 43 Barrel Complete O Ring 38 (on three spots) (color; gold, material; brass) Note) See the next page for "Service Manual for Tool Holders of Models HM0810/HM0810B/HM0810T" that we have newly issued, taking these modifications into account. Interchangeability(I/C) Item No. Current part Q'ty I/C New part Q'ty Note Three Bond 1342(50g) 0.1g For all Models 045017-6A HM0810: 093 HM0810B: 086 HM0810T: 081 HM0811: 095 HM0821: 090 Flat Washer 43 1 For all Models 267203-1 HM0810: 034 HM0811: 036 HM0821: 034 Tool Holder 1 Tool Holder Set 1 HM0810, HM0811 HM0821 193003-2322594-8 HM0810, HM0811, HM0821: 500 Tool Holder Ass'y 1 Tool Holder Set 1193010-5134716-6 HM0810B: 031 Tool Holder 1 Tool Holder Set 1 HM0810B193005-8323790-1 HM0810T: 032 Tool Holder Ass'y 1 Tool Holder Set 1 HM0810T193004-0125070-9 Note Interchangeability mark ; means that the new part is substituted for the current. Implementation HM0810 : From serial No.405169E (May,1999) HM0811 : Discontinued since Apr.,1989 HM0810B : From serial No.37902E (May,1999) HM0821 : Discontinued since June,1991 HM0810T : From serial No.57443E (May,1999) Service Manual for Tool Holders of Models HM0810/ HM0810B/ HM0810T When re-securing Tool Holder in repairing, always take the steps of procedure as described below. 1) How to Remove Tool Holder (a) Hold the machine tightly with a vise as in Fig.(1). (b) Insert a hex.wrench (size: 17mm between the opposite sides) into the hex. socket of Tool Holder, and loosen it with a pipe of one meter long. (Notes) 1.When the hex. socket of Tool Holder is broken, use a pipe wrench to grip Tool Holder directly and to loosen it. 2.When Tool Holder cannot be loosened, heat it with a gasburner . In case of damaging O Ring 38 and/or X Ring at the time, sure to replace them with new ones. pipe of 1m long loosened appropriate wood to stabilize the machine Vise Hex.Wrench (17mm between the opposite sides) 17mm Copper Plates (Part No.1R041) (Motor side of machine) Fig.(1) (Illustrated is Model HM0810T.) 2) How to Fasten Tool Holder on Barrel Compl...

Herunterladen

Geben Sie zwei Ziffern: