Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: DeLonghi Dateigröße: 968.45 kb Dateiname: Unterrichtssprache:

• If the hob is electric, gas, or induction, the minimum distance between the same and the lower part of the hood must be at least 65 cm. If a connection tube composed of two parts is used, the upper part must be placed outside the lower part. Do not connect the cooker hood exhaust to the same conductor used to circulate hot air or for evacuating fumes from other appliances generated by other than an electrical source. Before proceeding with the assembly operations, remove the anti- grease filter(s) (Fig.7A) so that the unit is easier to handle. - In the case of assembly of the appliance in the suction version prepare the hole for evacuation of the air. • We recommend the use of an air exhaust tube which has the same diameter as the air exhaust outlet hole. If a pipe with a smaller diameter is used, the efficiency of the product may be reduced and its operation may become noisier. • Fixing to the wall: - Drill the holes A respecting the distances indicated (Fig.2). - Fix the appliance to the wall and align it in horizontal position to the wall units. - When the appliance has been adjusted, definitely fix the hood using the screws A (Fig.5). For the various installations use screws and screw anchors suited to the type of wall (e.g. reinforced concrete, plasterboard, etc.). If the screws and screw anchors are provided with the product, check that they are suitable for the type of wall on which the hood is to be fixed. • Fixing the decorative telescopic flue: - Arrange the electrical power supply within the dimensions of the decorative flue. If your appliance is to be installed in the ducting version or in the version with external motor, prepare the air exhaust opening. - Adjust the width of the support bracket of the upper flue (Fig.3). - Then fix it to the ceiling using the screws A (Fig.3) in such a way that it is in line with your hood and respecting the distance from the ceiling indicated in Fig.2. - Connect the flange C to the air exhaust hole using a connection pipe (Fig.5). - Insert the upper flue into the lower flue. - Fix the lower flue to the hood using the screws B provided (Fig.5), extract the upper flue up to the bracket and fix it with the screws B (Fig.3). - If your appliance has the lower connections indicated as in Fig.4A, the fixing to be carried out is that shown in Fig.6A. To transform the hood from a ducting version into a filtering version, ask your dealer for the charcoal filters and follow the installation instructions. • Filter hood: Please note: - In order to transform the hood from EXTRACTOR HOOD into FILTER HOOD the carbon filters must be ordered at your distributor as accessory. We have two different types of Kit, one with non-regenerable active carbon filters (Fig.7B) and the other one with regenerable active charcoal filters (washable) (Fig.7C). - To replace the non-regenerable active carbon filters X, pull lever outwards as shown in Fig.7B. USE AND MAINTENANCE • We recommend that the cooker hood is switched on befor...

Herunterladen

Geben Sie zwei Ziffern: