Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: DeWalt Dateigröße: 207.73 kb Dateiname: Unterrichtssprache:

Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. • When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W.” These cords are rated for outdoor use and reduce the risk of electric shock. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord. Minimum Gage for Cord Sets Volts Total Length of Cord in Feet 120V 0-25 26-50 51-100 101-150 Ampere Rating More Not more AWG Than Than 6 -10 18 16 14 12 English English PERSONAL SAFETY • Stay alert, watch what you are doing when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or A moment of inattention while operating power tools serious personal injury, • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts. Air vents often cover moving parts and should be avoided. • Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. • Remove adjusting keys or wrenches before turning the tool on. A wrench or key that is left attached to a rotating part of the tool may result in personal injury. • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. • Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. TOOL USE AND CARE • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to a loss of control. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer and the rate for which it is designed. • Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. • Disconnect the plug from the power any adjustments, changing accessories, Such preventative safety measures reduce tool accidentally. • Store idle tools out of reach of children and persons. Tools are dangerous in the hands of untrained users. • Maintain tools with care. Keep cutting tools sharp Properly maintained tools, with sharp cutting edges are to bind and are easier to control. • Check...

Herunterladen

Geben Sie zwei Ziffern: