Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: DeWalt Dateigröße: 207.73 kb Dateiname: 6c9e31af-917a-4aad-b237-8b15f0e8459b.pdf Unterrichtssprache:

Push in and hold the button on the side handle. to the locked position (G). The chuck will 2. Move the rod so the distance between the end of the rod and click when properly installed. end of the bit equals the desired drilling depth. 3. Release the button to lock rod into position. DRILLING IN METAL (D25103, D25203, D25303, D25304) When drilling with the depth rod, stop when end of rod reaches surface of material. An SDS to round shank adaptor chuck is required. Ensure that tool is in drill-only mode. (D25101, D25201 has no drill-only mode). Start Maintenance drilling with slow speed and increase to full power while applying firm CLEANING & LUBRICATION pressure on the tool. A smooth even flow of metal chips indicates the Use only mild soap and damp cloth to clean the tool. Never let any liq proper drilling rate. Use a cutting lubricant when drilling metals. The uid get inside the tool; never immerse any part of the tool into a liquid. exceptions are cast iron and brass which should be drilled dry. The cutting lubricants that work best are sulphurized cutting oil or lard oil; Self-lubricating bearings are used in the tool and periodic relubrication bacon-grease will also serve the purpose. is not required. In the unlikely event that service is ever needed, take your tool to an authorized service location. NOTE: Large (5/16" to 1/2") holes in steel can be made easier if a pilot hole (5/32" to 3/16") is drilled first. Accessories CAUTION: When handling accessories after use, wear work (D25103, D25203, D25303, D25304) gloves. Accessories may be hot and may burn skin. DRILLING IN WOOD An SDS to round shank adaptor chuck is required. Ensure that tool is Recommended accessories for use with your tool are available at in drill-only mode. (D25101, D25201 have no drill-only mode). Start extra cost from your distributor or local service center. drilling with slow speed and increase to full power while applying firm CAUTION: The use of any non-recommended accessory may be pressure on the tool. Holes in wood can be made with the same twist hazardous. drills used for metal. These bits may overheat unless pulled out frequently to clear chips from the flutes. For larger holes, use spade bits, power auger bits, or hole saws. Work that is apt to splinter should be backed up with a block of wood. 6 MAXIMUM RECOMMENDED CAPACITIES D25101 D25103, D25203 D25201 D25303, D25304 MASONRY 1" 1" STEEL N/A 1/2" WOOD N/A 1 1/2" OPTIMUM CAPACITY MASONRY 5/32"-5/8" 5/32"-5/8" Repairs To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (including brush inspection and replacement) should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts. Full Warranty DEWALT heavy duty industrial tools are warranted for one year from date of purchase. We will repair, without charge, any defects due to faulty materials or workmanship. For warranty repair information, call 1-800-4-DEWALT. This warr...

Herunterladen

Geben Sie zwei Ziffern: