Modele No. Modelo No. 45-0464 ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. • Safety • Assembly • Operation • Maintenance • Parts • Seguridad • Montaje • Operacion • Mantenimiento • Piezas de Repuesto • Securite • Assemblage • Fonctionnement • Maintenance • Pieces de Rechange ™ IMPORTA NT! Add grease to wheel bearings before using cart. IM

Turn cart over and place tongue (8) on latch stand bracket (6) and wheel support (3). 4. Slide axle through wheel support and tongue. FIGURE 3 axle tongue 5. Assemble the step bracket (10) to the latch lock bracket (9) using two 5/16 x 3/4" hex bolts (14) and 5/16" nylock nuts (17). Tighten. FIGURE 4 5/16" nylock nut latch lock bracket step bracket 5/16 x 3/4" hex bolt FIGURE 5 5/16" sims nut extension spring spring puller tool 5/16" x 4" hex bolt 5/16" nylock nut 6. Slide the step bracket (10)

49167 (REV. 5/06) CARTON CONTENTS (Loose Parts in Carton) CONTENIDO DE LA CAJA (Partes Sueltas en la Caja) CONTENU DU CARTON (Pieces en Vrac Dans le Carton) (Loose Parts in Carton) CONTENIDO DE LA CAJA (Partes Sueltas en la Caja) CONTENU DU CARTON (Pieces en Vrac Dans le Carton) 7 13 11 1 6 12 9 10 5 8 3 4 2 FRANCAISESPANOL ENGLISH 1. Poly Tray 1. Caisse 1. Caja 2. Guidon tubulaire 2. Handle Tube 2. Barra Tubular de Manejo 3. Barre d’attelage avant 3. Front Tongue 3. Elemento Frontal de Remolque

Refer also to the slope guide on page 9 of this manual. Stay off steep slopes! 10. Do not tow this cart on highways or on public thoroughfares. 11. Maximum towing speed is 10 m.p.h. 12. Do not load more weight into the push cart than you can handle and control comfortably. 12. Follow maintenance and lubrication instructions as outlined in this manual. 4 ENGLISH ASSEMBLY INSTRUCTIONS TOOLS REQUIRED FOR ASSEMBLY 5. Assemble the latch lock subassembly to the rear tongue using two 1/4" x 1" hex bolt

Modelo No. Modele No. 45-01773 CAUTION: Read Rules for Safe Operation and Instructions Carefully 14 CU. FT. FARM/YARD CART CARRETILLA DE POLY PARA JARDIN/GRANJA DE 14 PIES CUB. (0,39 METROS CUB.) REMORQUE AGRICOLE DE 14 PIEDS CUBE (0,39 METRES CUBE) PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. • Safety • Assembly • Operation • Maintenance

45-02264 CAUTION: Read Rules for Safe Operation and Instructions Carefully ATTENTION: Lire et suivre attentivement les instructions et consignes de securite de cette notice. PRECAUCION: Lea cuidadosamente los Procedimientos e Instrucciones para la Operacion Segura de la Maquina. ™ OWNERS MANUAL MANUAL DEL USUARIO MANUEL D’UTILISATION MODEL NO. 45-02264 CAUTION: Read Rules for Safe Operation and Instructions Carefully ATTENTION: Lire et suivre attentivement les instructions et consignes de securi

7. Place one U-clamp (Ref. 8) at the end of one handle extension and align holes. Insert a carriage bolt (Ref. 9) through a hole at the front of the tray and through the U-clamp, the handle extension and the front hole in the channel leg. Secure loosely with one flat washer (Ref. 13), lock washer (Ref. 14) and hex nut (Ref. 12). 8. Repeat step 7 for the other side of tray. 9. Slide axle (Ref. 3) through both U-clamps and center axle left to right. 10. Place two large flat washers (Ref. 11), a wh

Insert a carriage bolt (Ref. 9) through a hole at the front of the tray and through the U-clamp, the handle extension and the front hole in the channel leg. Secure loosely with one flat washer (Ref. 13), lock washer (Ref. 14) and hex nut (Ref. 12). 8. Repeat step 7 for the other side of tray. 9. Slide axle (Ref. 3) through both U-clamps and center axle left to right. 10. Place two large flat washers (Ref. 11), a wheel (Ref. 2) and another two large flat washers (Ref. 11) onto one end of axle. As

Secure axle to wheel support or axle brackets, using 1/4" x 1-3/4" long hex bolts (J), lock washers (K)) and hex nuts (L). See figure 13. FIGURE 13 20. Assemble large diameter flat washer (D), wheel, another flat washer (D), cotter key (B) and hub cap (E) to each axle end. NOTE Position valve stem to outside when installing wheels on axle. See figure 14. AXLE HUB CAP (E) FIGURE 14 21, Turn cart assembly over to rest on wheels. This completes the cart assembly. Be sure to read safety rul

FT. (SUPER 17) • Assembly • Operating •Maintenance •Repair Parts 303 WEST RAYMOND • SULLIVAN, ILLINOIS 61951 PRINTED IN U.S.A FORM NO. 46085 (Rev. 11/94) ASSEMBLY INSTRUCTIONS Contents of Hardware Pack (See figure 1) REF. QTY. DESCRIPTION A 2 Tube Spacer 1-1/4" O.D. x 2" Lg. B 2 Pin, Cotter 1/8 x 1-1/2” Long C 2 Hex Nut 3/8 Thread D 4 Washer, Flat 1.032 I.D. E 2 Hub Cap F 23 Hex Bolt 1/4 x 1/2" Long G 6 Hex Bolt 1/4 x 5/8" Long H 6 Hex Bolt 1/4- 3/4" Long I 2 Lock Washer 3/8" I.