Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: American Standard Dateigröße: 1.84 mb Dateiname: Unterrichtssprache:

A pressure wire connector is provided on the exterior of the motor unit to permit connection of a no. AWG solid copper bonding conductor between this unit and all other electrical equipment and exposed metal in the vicinity, as needed to comply with local requirements. To reduce the risk of an electric shock, connect this connector the grounding terminal of your electric service or supply panel with a conductor equivalent in size to the circuit conductors supplying this unit. IMPORTANT SAFETY INSTRUCTIONSINSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONSREAD AND FOLLOW ALL INSTRUCTIONS! Lifetime™/Evolution™ CornerLifetime™/Evolution™ 5' x 3 " Lifetime™/Evolution™ 5' x 3 " Lifetime™/Evolution™ ' x 3 " Lifetime™/Evolution™ 5' x 3 " IALifetime™/Evolution™ OvalLifetime™ SavonaLifetime™ ReminiscenceLifetime™ EllisseLifetime™ Cadet ' x 3 " Lifetime™ Cadet ' x " Lifetime™ Cadet CornerLifetime™ 5' x " 0 0 7717 3 5 5 01 0 711 773 77 775 05INCLUDEDXXXXXXXXXXXX0707. 00 1.01 1.01 71.01 INTEGRAL .01 NOTAVAILABLE NOTAVAILABLENOTAVAILABLE 7 .01 7 .01 NOTAVAILABLE 1 0. 00XXXXXXXXXXXXXXXXXXXXXXXX15 .500.0 015 .500.0 0* 15 .500.0 0* 15 .500.0 0* 15 .500.0 0* 15 .500.0 015 .500.0 015 .500.0 015 .500.0 015 .500.0 015 .500.0 015 .500.0 015 3. 70.0 0Optional Components (Not Included) Required Components (Not Included) E-Z InstallHeaterApronKitTile BeadKitBath Filler • 15 3. 70.XXX15 . 05.XXX* 15 . 05.XXX* 15 . 05.XXX* 15 . 05.XXX* 15 3. 70.XXX15 3. 70.XXX15 3. 70.XXX15 3. 70.XXX15 3. 70.XXX15 3. 70.XXX15 3. 70.XXX15 3. 70.XXX Drain • (Specify Finish) Drain • (White) List of Required Tools and Supplies: Tools• Level• Tape Measure• Pipe Wrench• Slip Joint Pliers• Screw Driver• Standard Woodworking Tools• Personal Safety Equipment• Caulking GunSupplies• Nails• Putty• Caulking (waterproof) • 1 x Stringers• Drop Cloth• Cement, Plaster, GroutGeneral Installation InformationCarefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately. After inspection and during installation, protect the bath from construction damage. Before installation, and before enclosing with wallboard, tile, etc., the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling! Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system. Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. For electrical requirements, refer to section titled “Whirlpool Electrical Installation Instructions”. Check for availability of optional American Standard wall tiling bead (required for recess installation). Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth. DescriptionModel NumberLIST OF OPTIONAL COMPONENTS (NOT INCLUDED): • For these components please see your Vendor. * These models require American Standard Lifetime™ Drain 15 . 05 or 15 .500!WARNING: Do not lift whirlpool by the piping harness at any time. SPECIFICATIONS: GENERAL SPECIFICATIONS FOR LIFETIME / EVOLUTION WHIRLPOOLS AND BATH TUBSTABLE 1SIDE VIEWDRAIN / OVERFLOWEND VIEWLHWCABJ 0 0L / V Corner* L / LA / V / VA 5' x 3 " 771L / LA / V / VA 5' x 3 " 7 3 L / LA / V / VA ' x 3 " 5L / V 5' x 3 ” IA-LHO / IA-RHO 5L / LA / V / VA Oval 01LSavona 0 L / LA Reminiscence 711L Ellisse 773L Cadet ' x 3 " 77 L / LA Cadet ' x " 775L Cadet Corner 05L 5' x " A 1 " ( 57 mm) B 13-3/ " (3 mm) A 0-1/ " (511 mm) B 11" ( 7 mm) A 0-1/ " (511 mm) B 11" ( 7 mm) A 0-1/ " (511 mm) B 11" ( 7 mm) A 1 -1/ " ( 5 mm) B 10-1/ " ( mm) A 15-1/ " (3 7 mm) B -1/ " ( 0 mm) A 1 -1/ " ( 13 mm) B -1/ " (1 5 mm) A 15-1/ " (3 mm) B " (15 mm) A 17-3/ " ( 1 mm) B " (10 mm) A 17" ( 3 mm) B 1 " (305 mm) A 1 -1/ " ( 13 mm) B -1/ " (1 5 mm) A 1 -1/ " ( 1 mm) B -1/ " ( 15 mm) A 1 -1/ " ( 13 mm) B -1/ " (1 5 mm) 130mm(5-5/ ) 3mm(3-1/ ) 3mm(3-1/ ) 3mm(3-1/ ) 73mm( -7/ ) mm(1-3/ ) 1 0mm(5-1/ ) 15 mm( ) 10 mm( ) 57mm( -1/ ) 57mm( -1/ ) 7 mm(11) 15 mm( ) C 1 -1/ " ( 5 mm) C 0" (50 mm) C 0" (50 mm) C 0" (50 mm) C 0-1/ " (515 mm) C 1 -1/ " ( mm) C 0" (50 mm) C 1 -1/ " ( mm) C 1 -1/ " ( 5 mm) C 1 -1/ " ( mm) C 1 -1/ " ( mm) C 1 -1/ " ( mm) C 1 -1/ " ( 5 mm) Templateprovided5 -1/ " (1 5 mm) x 30-1/ " (77 mm) 5 -1/ " (1 5 mm) x 3 -1/ " ( 7 mm) 70-1/ " (17 0 mm) x 3 -1/ " ( 7 mm) N/D " (1 5 mm) x 3 " ( 3 mm) -3/ " (177 mm) x " (10 7 mm) Templateprovided70-1/ " (17 1 mm) x -1/ " (11 1 mm) 70-1/ " (17 1 mm) x 3 -1/ " ( 70 mm) 70-1/ " (17 1 mm) x 0-1/ " (1537 mm) Templateprovided5 -1/ " (1 mm) x 0-1/ " (10 mm) Template751 0-100 0-3/1 " (15 mm) x 30-1/ " (77 mm) 0-3/1 " (15 mm) x 3 -1/ " ( 7 mm) 7 -3/1 " (1 33 mm) x 3 -1/ " ( 7 mm) 0-3/1 " (15 mm) x 30-1/ " (77 mm) -3/1 " ...

Herunterladen

Geben Sie zwei Ziffern: