Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Harbor Freight Tools
Dateigröße: 1 mb
Dateiname: 92508.pdf
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
2. Do not operate lights in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Light switches create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away during installation. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 2 ELECTRICAL SAFETY 4. This light must be installed into an outlet box properly installed and grounded in accordance with all codes and ordinances. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the light should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 5. During installation, avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 6. Do not expose open power outlets or wires to rain or wet conditions. Work only on a dry day with no chance of rain, and finish all work and seal the Base (1) of the lantern BEFORE leaving the work area. 7. Do not abuse the power lines. Never use the power lines to hold the lantern during installation. Keep the power lines away from heat, oil, sharp edges, or moving parts. Replace damaged power lines immediately. Damaged power lines increase the risk of electric shock. 8. Always disconnect the electrical circuit before performing any installation, internal inspection, or maintenance procedures. 9. Use the plastic hook on the Mounting Bracket (8) or other practical ways to secure and support the lantern to the outlet during installation. Holding the lantern by hand or allowing the lantern to hang on the wires is dangerous and may damage the wiring, leading to electric shock or fire. PERSONAL SAFETY 10. Stay alert. Watch what you are doing, and use common sense during installation. Do not attempt to install this item while tired or under the influence of drugs, alcohol, or medication. A moment of inattention during installation may result in serious personal injury. 11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts during installation. 12. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of any power tools used during installation, if an unexpected situation arises. 13. Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Always wear ANSI approved safety goggles when installing using tools and/or equipment. 14. Do not use the light if the Power Switch does not turn it on or off. Any light that cannot be controlled with the Power Switch is dangerous and must be replaced. SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 3 15. 15. 16. Check for loose mounting, breakage of parts, and any other condition that may affect the lantern’s operation. If damaged, have the lantern serviced before use. Many accidents are caused by poorly maintained fixtures. SERVICE 17. Fixture service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 18. When servicing a fixture, use only identical replacement parts. Follow instructions in the “Maintenance Instructions”section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. 19. Maintain labels and nameplates on the Lantern. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 20. Only install type A bulbs rated at or below the maximum wattage (100 Watts) for this Lantern. 21. Do not open the black box inside the Base (1). There are no user-serviceable parts inside. SYMBOLOGY V ~ A noxxxx/min. Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions per Minute (RPM) UNPACKING When unpacking, check to make sure all the parts shown on the Parts List on the last page are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. SKU 92508 For technical questions, please call 1-800-444-3353. PAGE 4 ASSEMBLY INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on the last page. The power to the outlet box must be disconnected before attempting to install this item. If the power is left connected during installation, or if the power comes on accidentally, SEVERE PERSONAL INJURY or DEATH can occur. 1. ...