Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
....... ................................ ...... ......... SPS-30MMS ..... ................... .. .. ................ ............SPS-30MMS........................... 1........... (4.14mm) 2....... 3 + .. 1 3....... (4.12mm) 4..... 3...5..... ...... 1 1 66 ... 2 .... 2 73 5 5 3 4 4 ....... ... 88 .... ..... .... ..... (3..).....2............. (AVX-S20 ...../..........) ..7.................... . NS-M125 • .......................... . NS-M225 ........................ . NX-S30 (2........ 3............. ......) (AVX-S30 ...........) . NS-M025 3......... .................................................... .............. ............................ ........... ............................ ........ ............................... ............................ ............................. ........................... ............................ ........................... .............................. ...................... .............................. .......................... .............................. ...................... .............................. ................. 5....... (6.14mm) 6... 7..... 8.... .. ....... (.......+...........) 1. ............. ................1........ ....+........... ¦... ¦....... • .....2...................... (..: mm) ...... .. . NS-10MMT(NS-10MMTS) • .......................... . NX-430P ...................... 80 (NS-P430/NS-P4 36 ........./..... 618-868278 64 25 320 320 60 2. ............. .......) .......................... . NX-S20 (NS-P025/NS-M 025...../........ ..........6............... ..) ........ .. 4.......... 8...............(........) ............ 5............. ................... ......................... ¦...................... .......................... ............ (Following information is applicable to customerswho live in Japan only.) .......... TEL.(0570)01-1808(......) ......................... ..... PHS................ . TEL.(053)460-3409FAX.(053)460-3459 .... 430-8650 ............ 10-1 ........10:00~12:00,13:00~18:00(........................... ..............) ........... .... : 320 x 618 ~ 868 x 320 mm 8 4 4 5 ..... ..... .... 3...5..... ...... ......... ......... .... 6................ .......................... .................3....... ¦.. (4X12mm)... 5.......(6X14mm) (........) ¦ ............4mm...: .. : 2.4 kg/1. 4........3.......( 4X12mm).... ....+............ 8 ¦ ............6mm...: 5.......( 6X14mm)........+.. .......... ... ........&........... • .......................... .. 2.......(3..)........... ...... • .......................... 3 5 3 . 430-8650....... 10-1 .................... WG59990 © 2005 All rights reserved. Printed in China . ASSEMBLY PROCEDURES SPEAKER STAND Before beginning assembly, check the parts list and make sure all the parts are included. ASSEMBLY Read this before use . ASSEMBLY FIGURE . PARTS LIST SPS-30MMS INSTRUCTIONS For speakers with screw holes at the left and right of the NAME QUANTITY speaker base. Thank you for selecting the Yamaha SPS-30MMS speaker stand. 1 Binding tapping screw (4 x 14 mm) PRECAUTIONS 1 1 6 6 Base 2 Support 2 7 3 5 5 3 4 4 Limit of the stand height Pole 88 Plate Speaker cable Speaker Use the binding machine screw 3 or 5 3 Binding machine screw (4 x 12 mm) 2 4 Washer 2 . This speaker stand is only for the speaker systems . To prevent the speaker stand from discoloring and 2 Hexagon socket set screw 3 + 1 spare 5 Binding machine screw (6 x 14 mm) listed in “USABLE SPEAKERS” below. Do not use warping, keep the speaker stand away from the stoves 6 Pad 7 Wrench (hexagonal) the speakers other than these listed. and places where it will be exposed to direct sunlight, . To prevent the speaker from falling, use the screws etc. and parts provided with the stand. . Do not attempt to clean the speaker stand with 8 Gasket chemical solvents as this might damage the finish. . To prevent the speaker stand from falling over, select a location which is flat and stable. . Use a clean, dry cloth. . ASSEMBLY PROCEDURES . When moving the speaker and stand, be sure to hold . To avoid accidents resulting from tripping over (You will need a screwdriver for assembly.) loose speaker cables and to prevent the speaker the support detached from the speaker. 1. Attaching the base and support. stand from falling over, fix the speaker cables to the . Secure placement or installation is the owner’s Pass the support through the hole from the bottom of the wall, etc. responsibility. YAMAHA shall not be liable for any base, and fasten the binding tapping screws 1. accident caused by improper placement or installation . Do not let the children lean on the stand as this of speakers. • Fix the support so that the holes for the screws comes to might cause the serious accidents resulting from the rear side. the falling over of the speaker stand. • Do not overtighten the binding tapping screws 1. Doing so may damage the screws or assembly. ¦ DIMENSIONS ¦ USABLE SPEAKERS unit: mm(inch) Top view 80. N...