Check all parts and accessories against the delivery note. Before connecting to the power supply, ensure that all packaging has been removed. Check that the voltage shown on the Data Rating Plate conforms to your power supply. WARNING - THIS APPLIANCE MUST BE EARTHED The cabinet has been fully wired internally at BKI and is supplied with separate mains terminal blocks for power supply connections by the electrical contractor. Note: Any accessories may have been supplied or packed separately, che

Ensure that all packaging has been removed before switching on. Installation Due to the open fronted design, the maximum holding time for the product to be held will depend on the siting of the cabinet in store. Ideally the cabinet should not be sited by entranceways, ventilation fans or next to refrigeration units as this could adversely effect the performance. After positioning the Cabinet, connect the main power lead to a 230v 13A electrical supply ensuring that the lead is kept as short as p

The griddle plate is 1" thick (25.4mm) and 24" deep (610mm), polished, cold-rolled steel. Six widths are available from 24" (610mm) to 72" (1829mm) in one foot increments. The XG Series features high-performance, energy-efficient, 30,000 BTUH burners located every 12" with individual, operator-controlled valves and are available in three control types: manual, thermostatic or snap-action. Snap-action controls are supplied with NEMA 15-P cord & plug in 120V. The interior combustion chamber is hea

Front grease trough, slide out stainless steel water pan/grease drawer and 4" (102mm) chrome plated adjustable legs are standard. The tilting breakfast griddle is 1/4" (7mm) cold rolled steel. Interior combustion chamber is fabricated of 11 gauge and 16 gauge HRS and hand welded to form a single unit. The XX-4BG features four 24" long, 18,000 BTU/HR, independently controlled, clog-proof, high efficiency burners. 14 Gauge, 300-series stainless steel radiant heat deflectors are placed directly a

Please Note:- No warranty is given on glass/bulbs or quartz tubes. All BKI equipment is supplied to the following Warranty from Standex International Ltd T/A BKI - Europe (hereinafter called “the Manufacturer”) 1. Subject to the other terms of this Warranty the Manufacturer will provide free replacement of detective materials and other components within a period of 12 months from delivery, where any defective part or component is reasonably attributable to faulty materials or workmanship and pro

• Do not attempt to clean the elements or lamp. • Do not use a water jet or steam cleaner. • Do not use abrasive or corrosive cleaners. GLASS All flat and curved glass panels fitted to “Hot Shop” holding cabinets are manufactured from toughened or tempered safety glass. IMPORTANT:- Take care when cleaning or handling glass, allow glass to cool before cleaning, for best results use a clear liquid smear free glass cleaner. Do not use abrasive cleaners or scouring pads on glass panels. 8 The Front

FOOD CONTAINERS “Hot Shop” food display cabinets are supplied with a mezzanine shelf and 65mm deep 1/1 gastronorm pans fitted with wire inserts as standard. Wet Foods :- Chicken, cooked meats etc, should be placed in the gastonorm pans, on the wire inserts to allow for drainage. Pies, Pastries :- Should be placed above on the mezzanine shelf. The gastronorm pan section can be split up using the various sizes available in the gastronorm pan range, to a maximum depth of 65mm see page 11 (spare par

Safe Work Practices Beware of High Voltage This equipment uses high voltage. Serious injury can occur if you or any untrained or unauthorized person installs, services, or repairs this equipment. Always Use an Authorized Service agent to Service Your Equipment. 2 Universal Warmer Introduction Keep this manual with the Equipment This manual is an important part of your equipment. Always keep it near for easy access. If you need to replace this manual, contact: BKI Technical Services Department P.

Defective conditions caused by abnormal use or misuse, lack of or improper maintenance, damage by third parties, alterations by unauthorized personnel, acts of God, failure to follow installation and/or operating instructions, or any other events beyond the reasonable control of the Company will NOT be covered under this warranty. The obligation of the Company under this warranty shall be limited to repairing or replacing (at the option of the Company) any part, with the exception of lamps, fuse

Installation Instructions If a side or back panel is removed on the chute, the other two sides must be sealed with NSF approved silicone. Seal all inside seams greater than 1/32”. 1. Obtain a suitable countertop location for the unit that will provide a clearance of 4” from the rear louvers. 2. Plug unit into 20 amp, 120 volt recepticle. 5 BKI Fry Warmer Operation Operation Unit Startup and Preheating 1. Turn on power to the unit. 2. Allow the equipment to preheat for ten (10) minutes before loa