Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Kompernass Dateigröße: 126.65 kb Dateiname: Unterrichtssprache:

This chocolate contains the ideal proportions of cacao and cacao butter, thus ensuring the best possible flow characteristics. Using the chocolate fountain Note: Melt the chocolate before filling the chocolate fountain, either in a microwave or on the stove. It will take a long time to melt it in the chocolate fountain! 1. Place a maximum of 500 gr of chocolate into a pot and then heat this up, either in a double boiler or in the microwave. Details of the type of chocolate suitable for the chocolate fountain are to be found in the chapter “Suitable chocolates”. 2. Add about 2-4 table spoons of cooking oil to increase the flow capacity. When warming it up, ensure that the chocolate does not become "burnt on". 3. Repeat this procedure with a further maximum of 500 gr of chocolate for the second half of the chocolate fountain. Note: You can fill one side of the chocolate fountain with white chocolate and the other side with darker chocolate. Note: If you are intending to fill only one side of the chocolate fountain with chocolate, remove the screw-conveyor 5 on the side not in use. This will reduce the running noise level from the chocolate fountain. 4. Place the function switch w at the position “ ” for approx. 3 minutes to pre-heat the bowl 6 for the liquid chocolate. 5. After the bowl 6 has warmed up, pour in the liquid chocolate. You could use the spatula 8 to help you do this. 6. Place the function switch w at the position “ ”. The screw-conveyors 5 start to turn and, after a short time, the chocolate flows over the apex 1 and the cascades 2/3 then back into the bowl 6. - 4 Important Should, due to oversight, the chocolate you have poured in still be too hard and the screw-conveyors 5 only turn slowly, or not at all, immediately move the function switch w to the position “ ”. If you do not, the appliance could become irreparably damaged. First move the function switch w back to the position “ ” when the chocolate is more fluid. If need be, add some cooking oil. 7. You can now, subject to taste, dip fresh fruit, dried fruit, biscuits, nuts or other foodstuffs in the liquid chocolate or hold them under the flowing chocolate. To cover soft foodstuffs with chocolate, it is a good idea to use the supplied plastic skewers 9. Important Ensure that firm foods do not fall into the chocolate fountain, as they could block the screw-conveyors 5. The motor could become irreparably damaged. 8. When you want to take the chocolate fountain out of use, position the function switch w at “O”. Let it cool down to a level where the chocolate is still somewhat soft, thus allowing it to be more easily removed. Note: For hygienic reasons the chocolate should only be used once, as microbes could form in it. When the chocolate has cooled and solidified after use, do not melt it for a second time, instead, dispose of it. Cleaning and Care Attention! Always withdraw the plug from the power socket before cleaning! Risk of electrical shock! Allow the appliance to cool down before cleaning it. Risk of Burns! Do not use any aggressive or abrasive cleaning agents to clean the appliance. The surfaces would be irreparably damaged. Note: UNDER NO CIRCUMSTANCES should you pour the remaining chocolate into the toilet or into the drains. That would lead to blockages. 1. Carefully dismantle the apex, 1, the cascades 2/3, the tower base 4 and the screw- conveyors 5. 2. Wipe the chocolate residues off with a paper towel and lay the individual components in a solution of hot water and mild detergent for several minutes. 3. After this, the chocolate residues can be easily removed with a dishwashing brush or cloth. For the places that are difficult to reach, it is best to use the cleaning brush. 4. Rinse the individual parts with warm water then dry them well. Attention! NEVER submerse the base 7 in water or other liquids. The appliance could also be irreparably damaged! 5. Wipe the bowl 6 with a moist cloth and remove all chocolate remnants. - 5 6. Fill the bowl 6 with hot water and a mild detergent and let it stand for about an hour. Then soak up the water and chocolate residues with a dishcloth. Clean difficult to reach places with the cleaning brush. Afterwards, rinse or wipe the bowl 6 with clean water so as to remove all traces of the detergent. 7. Dry the bowl 6. 8. To clean the upper surfaces of the base 7 use a soft and moist cloth. Then carefully dry them off. 9. Clean the plastic skewers 9 and the spatula 8 in a mild soapy solution. Disposal Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC. Dispose of the appliance through an approved disposal centre or at your community waste facility. Observe the currently applicable regulations. In case of doubt, pleasecontact your waste disposal centre. Dispose of all packaging materials in an environmentally friendly manner. Importer Warranty and Service The warranty for this appliance is for 3 years from the dat...

Herunterladen

Geben Sie zwei Ziffern: