Stimmen - 5, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
Hot Surface Safety Do not touch hot surfaces. Use oven 1. mittens should it be necessary to lift the Hot Plate before it has cooled. Allow to cool before putting on or tak2. ing off parts. Do not operate the appliance near 3. draperies, curtains, and walls. These flammable materials may catch fire from this electric appliance. Provide adequate ventilation space 4. on all sides of the appliance. Inadequate ventilation may cause fire or damage to the appliance. Keep multiple ABC class fire extin5. guishers nearby. Monitor the appliance while in use. Foodborne Illness Safety Follow Food and Drug Administration 1. (FDA) food safety recommendations for cooking and food handling (fda.gov). Also, refer to following safety information from FDA’s website: Cooking times (if provided) are a. estimated. Verify that all food is properly cooked. Steam, roast, or otherwise heat all pieces of meat and eggs to an internal temperature of at least 160° F1. 1 Poultry should be cooked to an internal temperature of at least 165° F. For whole poultry, temperature measurement should be taken in the thigh. To gauge shellfish doneness, refer to FDA food safety guidelines. Keep hot food hot (above 140° F) b. and cold food cold (below 40° F). Do not let perishable food sit out longer than 2 hours (1 hour in temperatures above 90° F). General Safety The use of accessory attachments 1. not recommended by the appliance manufacturer may cause injuries. Attach plug to appliance first, then 2. plug cord into the wall outlet. To disconnect, turn control to “off”, then remove plug from wall outlet. Do not use appliance for other than 3. intended use. Do not leave Hot Plate unattended during use. Maintain labels and nameplates on 4. the appliance. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Do not set up Hot Plate near the front 5. edge of countertops, where it could be pulled off counter, causing injury. This product is not a toy. Keep it out 6. of reach of children when children are not being closely supervised. WARNING: Handling cord on this 7. product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) The warnings, precautions, and 8. instructions discussed in instruction manual cannot cover all possible conditions and situations that occur. It must be understood by operator that common sense and caution are factors which cannot be built into product, but must be supplied by operator. Save these instructions. Specifications Electrical Input 120 V~ / 60 Hz Temperature Range Variable Heat Settings Burner/Heat Element Single Thermal Coil Heat Element HOUSEHOLD USE ONLY Unpacking When unpacking, make sure item is intact and undamaged. If parts are missing or broken, call Harbor Freight Tools at 1-800-444-3353 as soon as possible. Cleaning Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product. To prevent serious injury from accidental operation or electric shock: Before cleaning appliance, make sure the switch is turned off, the cord is unplugged, and the unit has cooled completely. Do not immerse heating element, cord, or plug in water or any other liquid. To prevent foodborne illness, wipe 1. any non-electrical parts of the unit before use with a wet sponge or disinfectant kitchen wipe. Dry with a soft cloth. Wipe the body 2. with a soft clean cloth or sponge. Allow unit to dry completely before 3. use. Note: No assembly is required.4. Operation Read the entire Important Safeguards section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Clean Hot Plate before each use as 1. explained in the “Cleaning” section. Insert power cord into nearby 120V 2. outlet, making sure cord does not come into contact with Hot Plate. Turn the Hot Plate’s switch to desired 3. temperature setting (Low, Medium or High.) Once Hot Plate is activated, the indicator light will turn on. Place item on Plate. Do NOT leave 4. Hot Plate unattended during use. Heat/cook item and then remove it 5. from Hot Plate. To prevent accidents, turn off Hot 6. Plate and disconnect its power supply after use. Clean, then store the appliance indoors out of children’s reach. INSPECTION and MAINTENANCE To prevent serious injury from accidental operation or electric shock: Before appliance inspection or maintenance, make sure the appliance’s switch is turned off, the cord is unplugged, and the unit has cooled completely. To prevent serious injury from Appliance failure: Do not use damaged appliances. If abnormal noise or vibration occurs, have the problem corrected before further use. BEFORE EACH USE,1. inspect the general condition of the appliance. Check for loose screws, misalignment o...