Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Anleitung Sharp, modell AR-287

Hersteller: Sharp
Dateigröße: 3.2 mb
Dateiname: d5c15d68-2d98-4088-9694-549b4da686e0.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


In this condition, the fuser in the copier is maintained at a lower heat level thereby saving power. The preheat level is, however, high enough to allow the copier to come to a ready condition or begin copying approximately 30 seconds after any key input is made. To copy from the preheat mode, make desired copier selections and press the START key using the normal copying procedure. H KEY OPERATOR See page 22 of the KEY OPERATOR’S GUIDE for information on setting the preheat mode. As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. 1-6 INFORMATION FUNCTION INFORMATION FUNCTION The information function provides a quick reference guide to the use of the various features and functions of this copier. The information mode can be entered when the copier is in the standby mode. 4 EXIT MAKING 2-SIDED COPIES (2-SIDED COPY) INFORMATION SORTING COPIES INTO SETS OR STAPLING FINISHED SETS OF COPIES (OUTPUT) USING THE DOCUMENT FEEDER (DOCUMENT FEEDER REDUCTION/ENLARGEMENT/ZOOM (COPY RATIO) STORING FREQUENTLY USED JOB PROGRAMS (PROGRAM) 1/5 EXITINFORMATION SELECT INFORMATION. COPIER ADDING TONER INSTRUCTIONS 1 1 Press the INFORMATION ( ) key in the standby mode. l The screen for the information categories will appear. 2 2 Select the “COPIER” key to display the first screen of the copier feature items. . If the toner supply is not low, this screen is not displayed. Proceed to step 3. 3 3 Select the feature you would like to know about by pressing a copier feature item key on the touch panel. . If the feature you would like to know about is not displayed on the touch panel, press the scroll ( ) key on the touch panel until the feature is displayed. . If a copier feature item key is pressed, the description for that feature will appear. Use the scroll ( ) key to display additional information until all information for that feature has been displayed. . To return to the copier feature item screen, press the “INDEX” key. . To exit the INFORMATION mode, press the “EXIT” key on the touch panel. CHAPTER1 GETTING Information 1-7 CHAPTER1 GETTING STARTED Using the touch panel USING THE TOUCH PANEL How to use the touch panel READY TO COPY. AUTO EXPOSURE 100% COPY RATIO 1.8/ 11 2.11 17 1 2 STORE/DELETERECALL You can set or cancel a function displayed on the touch panel by pressing (touching) a key with a finger. The touch key operation can be confirmed with a beep tone (and highlighted display). . HHHHH KEY OPERATOR For the beep tone to be heard, the beep tone must be enabled by a key operator program. See page 27 of the KEY OPERATOR’S GUIDE. If any keys are displayed gray, the keys have been disabled. If you press these keys, two short beeps will be sounded. Selection of function READY TO COPY. SPECIAL MODES MARGIN SHIFT MULTI SHOT PAMPHLET COPY ERASE COVERS IMAGE EDIT TEXT STAMP TRANSPARENCY INSERTS DUAL PAGE COPY OK AUTO EXPOSURE PAPER SELECT 100%AUTO 8/ 111 2 ERASE EDGE ERASE CENTER ERASE EDGE+CENTER ERASE CANCEL 1/2 OK OK (0~1) inch To register the selected settings for a function, press the “OK” key on the setting screen. The settings indicated by a highlighted display will be registered as a selected function. Some special functions can be selected by pressing the relevant keys on the SPECIAL MODES screen (page 3-4) or on the IMAGE EDIT menu (page 3-21) to highlight the keys. To cancel these functions, press the relevant keys again to return the keys to the normal display. These functions are: Dual page copying, Centering, B/W reverse, and Binding change. 1-8 USING THE TOUCH PANEL Function setting icons READY TO COPY. 1.8/ 112.11 17 1 2 READY TO COPY. ERASE EDGE ERASE CENTER ERASE EDGE+CENTER ERASE CANCEL 1/2 OK OK (0~1) inch Selected special functions are indicated with their icons on the basic screen. The setting screen for a selected function can be easily called by pressing its icon. If multiple special functions are selected, up to six icons will be displayed. The function setting icons are listed below. The content of the icons indicated by *1 will change depending upon the particular settings for these functions. CHAPTER1 GETTING Using the *1 Margin shift (p.3-4) *1 Erase (p.3-6) Dual page copying (p.3-8) *1 Multi shot (p.3-10) *1 Covers (p.3-13) *1 Transparency film with insert sheets (p.3-15) Pamphlet copy (p.3-17) *1 Repeat copy (p.3-24) B/W reverse (p.3-27) Binding change (p.3-29) Date (p.3-32) Select stamp (p.3-35) Watermark (p.3-38) Page number (p.3-41) Job build (p.3-20) Tandem copy (p.3-44) Centering (p.3-22) 1-9 CHAPTER 2 MAKING COPIES This chapter describes the basic copying functions such as normal copying, reduction/enlargement, and exposure adjustments. Page . lllll AUDITING ACCOUNTS ............................. 2-2 . lllll USING THE RSPF ................................. 2-3 . lllll COPYING FROM THE DOCUMENT GLASS .............. 2-8 . lllll REDUCTION/ENLARGEMENT/ZOOM ................. 2-11 . lllll SPECIAL PAPERS (manual feed) ..........


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien