Anleitung Samsung, modell ML-3472NDK
Hersteller: Samsung
Dateigröße: 4.23 mb
Dateiname:
Unterrichtssprache:
|
 
|
|
|
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• If bi-directional communication is not turned on in the driver, it will also cause this message. “General Protection Fault”, “Exception OE”, “Spool32”, or “Illegal Operation” messages appear. Close all other applications, reboot Windows and try printing again. “Fail To Print,” “A printer timeout error occurred,” messages appear. These messages may appear during printing. Just keep waiting until the printer finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. Condition Possible cause Suggested solutions PostScript file can not be printed. The PostScript driver may not be installed correctly. • Print a configuration page and verify that the PostScript version is available for printing. • Install the PostScript driver. • If problem consists, contact a service representative. “Limit Check Error” message appears. The print job was too complex. You might need to reduce the complexity of the page or install more memory. A PostScript error page prints. Print job may not be PostScript. Make sure that the print job is a PostScript job. Check to see whether the software application expected a setup or PostScript header file to be sent to the printer. The optional The printer Open the PostScript driver tray 2 is not driver has not properties, select the Device selected in the been Settings tab, and set the Tray2 driver. configured to recognize the optional tray 2. option of the Installable Options section to Installed. When print a The resolution Make sure that the resolution document in setting in the setting in your printer driver Macintosh with printer driver matches that in Acrobat Acrobat Reader may not be Reader. 6.0 or higher, matched with colors print that in Acrobat incorrectly. Reader. Note Refer to Microsoft Windows User’s Guide that came with your computer for further information on Windows error messages. 9.13 Common Linux problems Common Macintosh problems Condition Suggested solutions The printer doesn’t print. • Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device. • Check if the printer is started. Open Printers configuration and select your machine on the printers list. Look at the description in the Selected printer pane. If its status contains “(stopped)” string, please, press the Start button. After that normal operation of the printer should be restored. The "stopped" status might be activated when some problems in printing occurred. • Check if your application has special print option such as “-oraw”. If “-oraw” is specified in the command line parameter then remove it to print properly. For Gimp front-end, select “print” -> “Setup printer” and edit command line parameter in the command item. I encounter error “Unable to open MFP port device file!” when printing a document. Please avoid changing print job parameters (via LPR GUI, for example) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Unified Linux Driver locks port while printing, the abrupt termination of the driver keeps the port locked and therefore unavailable for subsequent print jobs. If this situation occurred, please, try to release the port. When printing a document over the network in SuSE 9.2, the printer does not print. The CUPS (Common Unix Printing System) version distributed with SuSE Linux 9.2 (cups-1.1.21) has a problem with IPP (Internet Printing Protocol) printing. Use the socket printing instead of IPP or install later version of CUPS (cups-1.1.22 or higher). Condition Suggested solutions The printer does not print PDF file correctly. Some parts of graphics, text, or illustrations are missing. Incompatibility between the PDF file and the Acrobat products: Printing the PDF file as an image may solve this problem. Turn on Print As Image from the Acrobat printing options. Note: it will take longer to print when you print a PDF file as an image. The document has printed, but the print job has not disappeared from the spooler in Mac OS 10.3.2. Update your Mac OS to OS 10.3.3 or higher. 9.14 10.1 10 Installing accessories Your printer is a full-featured laser printer that has been optimized to meet most of your printing needs. Recognizing that each user may have different requirements, however, Samsung makes several accessories available to enhance the printer’s capabilities. This chapter includes: • Precautions when installing accessories • Installing a memory DIMM • Installing a wireless network interface card Precautions when installing accessories Disconnect the power cord:...
Dieses Handbuch ist für folgende Modelle:
Drucker - ML-3470D (4.23 mb)
Drucker - ML-3471DK (4.23 mb)
Drucker - ML-3471DKG (4.23 mb)
Drucker - ML-3471ND (4.23 mb)
)