Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
At this stage, the toner cartridge needs to be replaced. Check the type of toner cartridge for your machine. (See "Supply" on page 39.) 1. Turn the machine off, then wait a few minutes for the machine to cool. 2. Grasp the front cover and pull it toward you to open. 3. Remove the toner cartridge from its bag and remove the paper protecting the cartridge by pulling the packing tape. If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. For ML-2240 Series, if you have installed the dust cover, remove the dust cover before opening the front cover. Because the machine is very light, it may be moved when you use it; for example, when opening/closing the tray or installing/ removing the toner cartridge. Be careful not to move the machine. • Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. • Be careful not to expose the green surface (or sky blue), the OPC drum, into light. This will cause damage to the OPC drum. Cover the toner cartridge’s OPC drum with paper to avoid damaging it from the light. • Do not turn the toner cartridge over. Maintenance_ 29 4. Holding both handles on the toner cartridge, thoroughly rock it from side to side to evenly distribute the toner. 5. Locate the cartridge slots inside the machine, one on each side. 6. Unfold the toner cartridge handle and grasp it. Insert the cartridge in the machine until it snaps into place. 7. Close the front cover. Make sure that the cover is securely closed. If the cover is not firmly closed, printing errors may occur when you print. If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water. Hot water sets toner into fabric. • Don't use sharp objects, such as a knife or scissors, to open the toner cartridge package. You could damage the surface of the toner cartridge. • To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper to protect it if necessary. Carefully insert or pull out the toner cartridge not to scratch against the machine. • Do not touch the green surface (or sky blue), the OPC drum, with your hands or any other material. Use the handle on the cartidge to avoid touching this area. • Be careful not to expose the green surface (or sky blue), the OPC drum, into light. This will cause damage to the OPC drum. Cover the toner cartridge’s OPC drum with paper to avoid damaging it from the light. • Do not turn the toner cartridge over. Average yield for a new toner cartridge is 1,500 standard pages in accordance with the ISO/IEC 19752 standard. (Average yield for the original toner cartridge supplied with the machine is 700 standard pages.) troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Tips for avoiding paper jams • Solving other problems • Clearing paper jams The illustrations of the machine are based on ML-2240 series. ML-1640 series does not have a manual tray. TIPS FOR AVOIDING PAPER JAMS By selecting the correct media types, most paper jams can be avoided. When a paper jam occurs, follow the steps outlined on page 30. • Follow the procedures on page 21. Ensure that the adjustable guides are positioned correctly. • Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. • Do not remove paper from the tray while your machine is printing. • Flex, fan, and straighten paper before loading. • Do not use creased, damp, or highly curled paper. • Do not mix paper types in a tray. • Use only recommended print media. (See "Setting the paper size and type" on page 23.) • Ensure that the recommended side of the print media is facing up in the tray. If a paper jam occurs, the error LED on the control panel lights orange. Find and remove the jammed paper. To resume printing after clearing paper jams, you must open and close the front cover. CLEARING PAPER JAMS In the paper exit area Paper jams in this area may result in loose toner on the page. If you get any toner on your clothes, wash them in cold water as hot water will set the toner into the fabric. 1. If the paper jams as it exits to the output tray and a long portion of the paper is visible, pull the paper straight out. When you pull the jammed paper, if there is resistance and the paper does not move immediately, stop pulling. Continue with the next step. Troubleshooting_30 31 _Troubleshooting 2. Open the top cover and the inner cover. 3. Loosen the paper if it is caught in the heat rollers. Then pull the paper gently out. 4. Close the inner cover and the top cover. Printing resumes automatically. In the paper feed area 1. Remove any misfeed paper by pulling it out by the visible edge from the tray. Make sure that all of the paper is properly aligned in the tray. 2. Open and close the front or top cover to r...
Dieses Handbuch ist für folgende Modelle:Drucker - ML-1640 (3.65 mb)
Drucker - ML-1640K (3.65 mb)
Drucker - ML-1641 (3.65 mb)
Drucker - ML-1642K (3.65 mb)