Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
buttons are not working. No dial tone • Check that the phone line is properly sounds. connected. • Check that the phone socket on the wall is working by plugging in another phone. The numbers Make sure that the numbers are stored in stored in memory memory correctly. Print a Fax Phone Book. do not dial (Page 6.6) correctly. The original does • Make sure that the paper is not wrinkled and not feed into the you are inserting it in correctly. Check that machine. the original is the right size, not too thick or thin. • Make sure that the DADF is firmly closed. • The DADF rubber pad may need to be replaced. Contact a service representative. Faxes are not • The receiving mode should be set to Fax. received • Make sure that there is paper in the tray. automatically. • Check to see if the display shows any error message. If it does, clear the problem. The machine does • Make sure that the original is loaded in the not send. DADF or on the scanner glass. • Check the fax machine you are sending to, to see if it can receive your fax. The incoming fax • The fax machine sending you the fax may be has blank spaces faulty. or is of poor quality. • A noisy phone line can cause line errors. • Check your machine by making a copy. • The toner cartridge may be empty. Replace the toner cartridge, referring to page 10.3. Stretched words appear on an incoming fax. The fax machine sending the fax had a temporary document jam. There are lines on the originals you sent. Check your scan unit for marks and clean it. (Page 10.2) Condition Suggested solutions The machine dials a number, but the connection with the other fax machine fails. The other fax machine may be turned off, out of paper, or cannot answer incoming calls. Speak with the other machine operator and ask her/him to solve out the problem. Faxes do not store There may not be enough memory space to in memory. store the fax. If the display shows the low memory message, delete any faxes you no longer need from the memory and then try to store the fax again. Please call for service. Blank areas appear at the bottom of each page or on other pages, with a small strip of text at the top. You may have chosen the wrong paper settings in the user option setting. For details about paper settings. (Page 4.8) Common Windows problems Condition Suggested solutions “File in Use” message appears during installation. Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver. “Error Writing to • Ensure that the cables are connected LPTx” message correctly and the machine is on. appears. • If bi-directional communication is not turned on in the driver, it will also cause this message. “General Close all other applications, reboot Windows Protection Fault”, and try printing again. “Exception OE”, “Spool32”, or “Illegal Operation” messages appear. “Fail To Print”, “A These messages may appear during printing. printer timeout Just keep waiting until the machine finishes error occurred.” printing. If the message appears in standby messages appear. mode or after printing has been completed, check the connection and/or whether an error has occurred. Note Refer to Microsoft Windows 98/Me/NT 4.0/2000/XP/2003 User’s Guide that came with your PC for further information on Windows error messages. 11.20
Drucker - SCX-6345N (9.01 mb)
Drucker - SCX-6345NG (9.01 mb)