Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
SyncThru™ Admin 5 supports the custom filter based on device properties. The custom filter can help you much more than the Show option because it provides various properties and operators. For example, if you want to see devices that have IP addresses from 1.1.1.1 to 1.1.1.15, you can create the custom filter as follows: -Property = IP Address -Compound Option = IP Range -Property Value = 1.1.1.1 – 1.1.1.15. The custom filter is also used for grouping. When you create a new group, you can see the option, Automatically add discovered device to this group, which has the same concept as custom filtering (See "Filtering" on page 34, "Using customized group with options" on page 40). •Adding a device : You can discover and add a device into the Device List with the button. If you want to add devices one by one without using a discovery method, you can use this button. •Deleting devices : You can delete devices in the Device List with button. There are three ways to delete devices. -Delete Devices from Group : This option deletes the devices in the group. This only means that devices will not be deleted from the system and it may be found in other groups. -Delete Devices from System : This option deletes the devices in SyncThru™ Admin 5. This means that devices will be removed from all the groups and can be found again only after a new discovery. -Delete Devices from System and Block : This option deletes the devices in SyncThru™ Admin 5 and blocks them from the Device List. New discovery will not add the devices into the Device List. You can see the blocked devices in Settings menu > Settings > Device Management > Blocked Devices. •Viewing device details : You can see device details by double-clicking any device from the Device List. Details include Device Information (Input Tray, Output Tray, or Capability Information etc.), Supply Information, Usage Meters and Alerts. Device information •Configuration : Configure the selected devices (See "Using the Modify button" on page 42). •Map : Checks the device location (if Device Map Plug-in is installed). •SWS : Opens the SyncThru Web Service of the selected device. •Test print : You can remotely print a test page from the device. It can be used when you need to check if the printer is working fine. This Test print request will be sent with SNMP command, which means you need to check if your device's SNMP Write Community is same as SyncThru™ Admin 5's Write Community. (See "Connection Settings" on page 31) •Display message : The blue box shows the same information displayed on the device’s LCD display. •Updating device information : SyncThru™ Admin 5 collects device information periodically using SNMP. Basic information is based on public MIB, RFC 3805. For more detailed information, please see the Data Reference chapter (See "Data reference" on page 89). Group Settings Adding groups 1.Click the button on the bottom of the Customized groups panel. A window appears. If you want to create a group with options...
Dieses Handbuch ist für folgende Modelle:Drucker - CLX-6200FX (3.74 mb)
Drucker - CLX-6210FX (3.74 mb)
Drucker - CLX-6210FXK (3.74 mb)
Drucker - CLX-6240 (3.74 mb)