Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Fotos und technische Daten Sony DPP-FP97 |
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Even if you print such image is printed data with “Borderless” setting, you cannot with borders on eliminate the borders on both sides of a both sides. print. (.page 41) The whole area of an image cannot be printed. • Did you set “Pattern 1” in the Print setup menu? c You can print the whole area of an image by selecting “Pattern 1” in the Print setup menu. (.page 41) The image is printed at an angle. • Is the paper tray inserted properly? c Re-insert the paper tray firmly straight in to the end. There are white — c The print head or paper path may be lines or dots on the soiled. Use the supplied cleaning cartridge printed pictures. and sheet to clean the head and path. (.page 77) The picture is too — c Adjust the image by pressing MENU bright, dark, button and then selecting Edit- Adjust. reddish, yellowish, (.page 22) or greenish. Red-eye correction does not take effect with AUTO TOUCH-UP button. — c Adjust for the red-eye phenomenon by pressing MENU button and then selecting Edit - Red-eye Correction. (.page 24) Red-eye correction does not take effect with “Redeye Correction” menu. — c Set the size of the adjustment frame to be two to seven times as large as the eye. (.page 24) • Did you enlarge, reduce the size of, rotate, or move an image after red-eye correction? c Red-eye correction may not work properly if other editorial operations such as enlarging, reducing the size of, rotating, or moving an image. Perform these editorial operations first and then perform red-eye correction. Settings Symptom Check Cause/Solutions The “Borderless” and “Pattern 1/2” setting does not take effect. • Are you operating the CreativePrint menu? c In the CreativePrint menu, templates are used and you cannot select border/ borderless prints. 70 GB Saving or deleting an image Symptom Check Cause/Solutions You cannot save an image. • Is the memory card protected? c Use your digital camera or external device to release the protection and then try saving again. • Is the write-protect switch of the memory card in the LOCK position? c Slide the write-protect switch to the write enable position. • Is the memory card full? c Delete unnecessary images (.page 38), or replace it with a new memory card with sufficient free memory space. Save the image again. You cannot delete an image. • Is the memory card protected? c Use your digital camera or external device to release the protection and try deleting again. • Is the image DPOF preset? c Release the DPOF preset with your digital camera. • Is the image protected? c Display the image preview view, and check the detailed information display (.page 14). An image with (protect indication) is for read-only and cannot be deleted from the printer. • Is the write-protect switch of the memory card in the LOCK position? c Slide the write-protect switch to the write enable position. • Are you using a “Memory Stick-ROM?” c You cannot delete an image from or format a “Memory Stick-ROM.” An image was deleted accidentally. — c You cannot recover an image once it is deleted. The “Memory Stick” media cannot be formatted. • Is the write-protect switch of the memory card in the LOCK position? c Slide the write-protect switch to the write enable position. • Is it a “Memory Stick- ROM”? c You cannot delete an image from or format a “Memory Stick-ROM.” The “Memory Stick” media was formatted accidentally. — c Once the “Memory Stick” media is formatted, all the data is deleted and cannot be recovered. Troubleshooting Continued 71 GB Connecting with a digital camera or other external device Symptom Check Cause/Solutions The PictBridge mark does not appear on the LCD screen of the digital camera. • Is the digital camera connected correctly? c Connect the cable correctly. •Is the 1 (on/standby) button turned on? c Turn on the printer using the 1 (on/ standby) button. • Does your digital camera support PictBridge? c Refer to the manual supplied with your camera, or consult the manufacturer. • Is “Connecting” displayed c The message is not displayed while the on the printer LCD screen? printer is in the Edit, CreativePrint, or other menu modes. Exit the menu and then connect the cable again. c Disconnect the digital camera and the printer and then connect them again. Or turn off and then on the printer and the digital camera. • Is the USB setting of your camera in PictBridge mode? c Set the USB setting of your camera to the PictBridge mode. You connect and — c The printer has developed an over-current disconnect the error. Unplug the AC power cord of the USB cable, but printer, plug it in again, and then press the nothing happens. 1 (on/standby) button to recover from the error. You cannot stop — c The next print from the one currently printing even if printed will be canceled. you pressed c Depending on the digital camera you use, CANCEL. you cannot cancel printing from the printer. Operate the digital camera to stop printing. Refer to the operating instructions of the digital camera. You cannot make • Is the ...