Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Anleitung Zusammenfassung
2 Menu Button [MENU] Use this button to display the Menu screen. 3 Display Button [DISPLAY] Use this button to enter various selections in the Menu screen. Use to change the screen between a Preview Display and an Index Display. 4 [2], [1] Button Use these buttons to select Menu items and images on the index screen. 5 Power Lamp [ON] When you turn the power on, the Power Lamp turns on. 6 Print Lamp [PRINT] When this Lamp lights up, the printer is ready to print. 7 Error Lamp [ERROR] This lights when normal printing is no longer possible because, for example, the printing paper or ink has run out. 8 Paper Insert Slot [PAPER IN 4] Insert a sheet of paper here. 9 Paper Exit Slot A printed sheet of paper exits here. 20 21 Do not insert a sheet of paper into this slot. It may result in a paper jam or unit failure. 10Memory Card Slot This is where the Memory Card is inserted. 11Memory Card Door [SD CARD 3] 12Ink Cassette Insert Location Insert the Ink Cassette. 13Ink Cassette Eject Lever Slide to eject the Ink Cassette. 14Ink Cassette Compartment Door 15Paper Sliding Slot This slot is the opening for sliding the paper in and out while printing. Do not touch the paper while printing. 16USB Terminal [USB] Connect the accessory USB cable here for connection to your PC. 17Battery Eject Lever [BATTERY EJECT 2] Slide to remove the Battery. 18Card Compartment Window 19LCD Monitor Menu Screen or Index screen etc. is displayed here. 20Battery Holder Attach the battery here. 21DC Input Socket [DC IN 4.9V] Connect the AC Adapter (supplied accessory) to supply the power. DC IN 4.9V 1 2 DC IN 4.9V 1 2 DC IN 4.9V 21 112 Power Supply . Using an AC Adaptor 1 Connect the DC Input Lead to the [DC IN 4.9V] socket on the SD Mobile Printer. 2 Connect the AC main Lead to the AC Adaptor and the AC Outlet. .Hold down the Power Button [ ] for about 2 seconds, and the printer is on. The SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. . Using the Battery 1 Attach the Battery 1 to the Battery Holder on the SD Mobile Printer 1 and slide it forward until it locks with a click. 2 2 Connect the AC mains Lead to the AC Adaptor and to an AC Outlet. (Refer to the description above.) .The [ON] Lamp flashes. 3 Leave them as above until the Power Lamp [ON] goes off. .When recharging is completed, the [ON] Lamp goes off. .Remove the AC Adaptor to use the Battery. Ejecting the Battery Slide and hold the Battery Eject Lever 2 toward the direction shown by the arrow 1 and slide the battery to eject 2. 12 2 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. .When recharging, turn off the power of the printer. .Remove the battery if the printer is left unused for a long time. .When the battery is fully charged, up to 24 sheets can be printed in succession when the ambient temperature is 77 degrees F/25 degrees C. .Typical charging time to fully charge the battery is about 170 minutes (68 degrees F/20 degrees C and humidity 60 %). Higher or lower ambient temperature may cause a variation in the actual charging time. .When the Power Lamp flashes more quickly or slowly (or turns off), some abnormality may have occurred. Refer to “State of Power Lamp While Charging” on page 46. Paper/Ink Cassette The following Ink Cassette/Paper Sets may be used for this printer in addition to the paper/ink cassette supplied. . Paper That Can Be Used For Printing The SD Mobile Printer can use the following types of paper. (optional) .Credit Card Size 2-1/8"t3-3/8"(54t86 mm) Printing Paper : The Ink Cassette/Paper Set (VW-CSA20). This is a set consisting of an ink cassette and 20 sheets of standard paper. .8 Pre-Cut Adhesive Paper*: The Ink Cassette/Paper Set (VW-CSASD8). This is a set of an ink cassette and 20 sheets of an over-coating type of adhesive paper. *All accessories may not be available in all markets. .When taking the paper out of the package, remove sheets one at a time in order from the bottom sheet (opposite to the protection sheet). Then, carefully stack the sheets by pulling them out about 3 cm/1 inch off the package (Pay attention not to contact the paper with the adhesive portion of the package) 1. .Please read the “Precautions” carefully. (l llll44) .Handle the paper carefully, since surface of the paper is scratched easily. .Printing on paper with a flawed surface causes white patches on printed image. .When using adhesive paper, do not peel off the seal, otherwise, a paper jam or failure may be caused. .Use the ink cassette and paper contained in the box (The Ink Cassette/Paper Set). The ink cassette is designed to print the number of sheets contained in the Ink Cassette/ Paper Set. .When using adhesive paper, the picture printed may be displaced with reference to the cutting frame. .Do not fold or bend the paper. Insert it into the Paper Insert Slot with the ...