Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Savin Dateigröße: 3.41 mb Dateiname: Unterrichtssprache:

The original is automatically fed onto and removed from the exposure glass. 1. Correct any curl, fold, or crease in the originals before setting. 2. Confirm that the Insert Original indicator is lit before setting. 3. Confirm that no previous originals remain on the exposure glass. 4. Adjust the original guide to the original size. 23 SETTING ORIGINALS IN THE DUAL JOB FEEDER SETTING ORIGINALS IN THE DUAL JOB FEEDER Setting One Original At A Time Set the original face up into the dual job feeder until the Insert Original indicator goes off. □ Start with the last page of the originals. □ The original guide must touch the front side of the original. 6. Press the Start key. 7. While the Auto Feed indicator is lit after an original is fed, set the next original. The original is automatically fed and copied. □ While the Auto Feed indicator is lit, the dual job feeder is ready for another original. (You can change this time by User Tool 1. See page 15.) 8. Repeat steps 5 and 7 until copying is completed. 24 Setting Different Sized Originals SETTING ORIGINALS IN THE DUAL JOB FEEDER Setting Different Sized Originals Mixed Sized mode In this mode, you can set originals with different widths and lengths together into the dual job feeder. You can use the following sizes: A4/A3 version: A3, B4, A4 and B5 LT/DLT version: 11" x 17", 81/2" x 14", and 81/2" x 11" 1. Touch the Special Orig. key of the touch panel display. (See page 41.) 2. Touch the Mixed Sizes key of the touch panel display. (See page 41.) 3. Correct any curl, fold or crease in the originals before setting. 4. Confirm that the Insert Original indicator is lit before setting. 5. Confirm that no previous originals remain on the exposure glass. 25 SETTING ORIGINALS IN THE DUAL JOB FEEDER SETTING ORIGINALS IN THE DUAL JOB FEEDER 6. Adjust the original guide to match the widest original. 7. Set the originals face up into the dual job feeder until the Insert Original indicator goes off. □ Originals must be aligned to the rear-left corner of the dual job feeder, as shown. Setting Different Sized Originals 8. Press the Start key. Setting A Pasted Original SETTING ORIGINALS IN THE DUAL JOB FEEDER Setting A Pasted Original Pasted Original mode In this mode, you can set a pasted original into the dual job feeder. □ In this mode, you can set one original at a time. 1. Touch the Special Orig. key of the touch panel display. (See page 41.) 2. Touch the Pasted Original key of the touch panel display. (See page 41.) 3. Correct any curl, fold or crease in the originals before setting. 4. Confirm that the Insert Original indicator is lit before setting. 5. Confirm that no previous originals remain on the exposure glass. 6. Adjust the original guide to the original size. 27 SETTING ORIGINALS IN THE DUAL JOB FEEDER SETTING ORIGINALS IN THE DUAL JOB FEEDER Setting A Pasted Original Set one pasted original face up into the dual job feeder until the Insert Original indicator goes off. □ Start with the last page of originals. □ The original guide must touch the front side of the original. 8. Press the Start key. 9. While the Auto Feed indicator is lit after an original is fed, set the next original. The original is automatically fed and copied. □ While the Auto Feed indicator is lit, the dual job feeder is ready for another original. (You can change this time by User Tool 1. See page 15.) 10. Repeat steps 7 and 9 until copying is completed. 28 Presetting Originals During A Copy Run SETTING ORIGINALS IN THE DUAL JOB FEEDER Presetting Originals During A Copy Run 1. Touch the Preset key of the touch panel display. (See page 41.) 2. Following the instructions on the display, set the copy job settings for your next job. 3. Touch the Exit key of the touch panel display. Copying I Preset I you can preset a job with I Preset I. <■ Preset > I Cancel 11 Exit 1 HI Set features, then press iMtJ. The touch panel display changes as shown. Canceni Exit I Place the preset originals on top of the originals being copied, then press [Exit]. First originals Preset originals 4. Set the originals for your next job on top of the originals being copied. Without forcing them, push them in completely. □ Do not insert the originals too strongly. 29 SETTING ORIGINALS IN THE DUAL JOB FEEDER SETTING ORIGINALS IN THE DUAL JOB FEEDER Presetting Originals During A Copy Run 5. Touch the Exit key of the touch panel display. After your first job is finished, the next job will start automatically. Cancel ¡8 Exit! E Place the preset originals on top of the originals being copied, then press (Ml-i First originals Preset originals i □ When presetting a job using the compact sorter stapler, you have to remove the current job’s copies from the sorter stapler before the preset job can start. □ When presetting a job using the floor type sorter stapler, you might have to remove the current job’s copies before the preset job can start. Y...

Herunterladen

Geben Sie zwei Ziffern: