Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Off Auto Configuration Specifies whether the network adapter accepts the automatic IPv6 address configuration entries provided by a router Off On Note: On is the factory default setting. View Hostname Lets you view the current setting Note: These settings can be changed only from the Embedded Web View Address Server. View Router Address Enable DHCPv6 Enables DHCPv6 in the printer On Note: On is the factory default setting. Off Wireless menu Use the following menu items to view or configure the wireless internal print server settings. Note: This menu is available only for models able to be connected to a wireless network. Understanding printer menus This menu is available from the Network/Ports menu: Network/Ports > Network Note: If the network you want to join is protected by a security setting, you will have to join it from the Embedded Web Server or the Wireless Setup Utility. View Signal Quality Lets you view the quality of the wireless connection View Security Mode Lets you view the encryption method for the wireless connection. “Disabled” indicates that the wireless network is not encrypted. AppleTalk menu Menu item Description Activate Activates or deactivates AppleTalk support Yes Note: Yes is the factory default setting. No View Name Shows the assigned AppleTalk name View Address Shows the assigned AppleTalk address Set Zone Provides a list of AppleTalk zones available on the network
default zone exists, the zone marked with an * is the factory default setting. Understanding printer menus USB menu Menu item Description PCL SmartSwitch Sets the printer to automatically switch to PCL emulation when a print job received On through a USB port requires it, regardless of the default printer language Off Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PostScript emulation if the PS Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PS SmartSwitch setting is Off. PS SmartSwitch Sets the printer to automatically switch to PS emulation when a print job received On through a USB port requires it, regardless of the default printer language Off Notes: • On is the factory default setting. • When the Off setting is used, the printer does not examine incoming data. • When the Off setting is used, the printer uses PCL emulation if the PCL Smartswitch setting is On. It uses the default printer language specified in the Setup menu if the PCL SmartSwitch setting is Off. NPA Mode Sets the printer to perform the special processing required for bidirectional Off communication following the conventions defined by the NPA protocol Auto Notes: • Auto is the factory default setting. • Changing this setting causes the printer to restart. USB Buffer Sets the size of the USB input buffer Disabled Notes: Auto • Auto is the factory default setting. • The Disabled setting turns off job buffering. Any jobs already buffered are printed before normal processing is resumed. • The USB buffer size value can be changed in 1.K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether the Resource Save setting is On or Off. • Changing this setting causes the printer to restart. Mac Binary PS Sets the printer to process Macintosh binary PostScript print jobs On Notes: Off • Auto is the factory default setting. Auto • The Off setting filters print jobs using the standard protocol. • The On setting processes raw binary PostScript print jobs. Understanding printer menus Menu item Description USB with ENA ENA Address ENA Netmask ENA Gateway Sets the network address, netmask, and gateway information for an external print server that is attached to the printer using a USB cable Note: This menu item and its submenus are available only if the printer is attached to an external print server through the USB port. Settings menu General Settings menu Menu item Description Display Language Sets the language of the text appearing on the display English Note: All languages may not be available for all printers. Francais Deutsch Italiano Espanol Dansk Norsk Nederlands Svenska Portuguese Suomi Russian Polski Magyar Turkc...
Drucker - 231 (4.8 mb)