Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Cisco Systems Dateigröße: 1.63 mb Dateiname: SRP-275_IG_USAEURO_Rev_2_0.pdf Unterrichtssprache:

Note *1) Printing speed may be slower depending on the data transmission speed and the combination of control commands. *2) The above values are calculated under printing level 2 with recommended paper at normal temperature. The values may vary with environment temperature, printing level, etc. . Serial (RS-232C) Fixed Interface Model Windows Driver Installation: SRP-275A,AG,C,CG (IFC-S TYPE) 1. After running the product installation CD, run the Impact Printer > SRP-275(A/C) > Drivers > Windows Driver > Drivers Folder > Win SRP-275_Vx.x.x.exe file. 2. In the opening installation window, click on Next. 3. In the Ready to Install the Program window, click on Install. 4. In the Select OS Type window, click on Next. 5. In the Select Port Type window, select one Serial Port and click Next. (Figure 1.) 6. In the Question window, select Yes and the computer will reboot. 7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275 Icon > Right-Click > Properties. 8. In the Properties window, select the Port tab and click on the Port Settings. Check to see that the information is identical to the self-test results after installation. SELF TEST DIP Switch setup status Interpreter (DIP1_1,2): BXL/POS AutoCut (DIP1 _ 3): Disabled Memory S/W (DIP1 _ 5): Off Logo Print (DIP1 _ 6): Off Near_end (DIP1 _ 7): Enabled Print Column (DIP1 _ 8): 40 Rx ErrorPrint(DIP2 _ 1): Print ? HandShaking (DIP2 _ 3): RTS/DSR Word Length (DIP2 _ 4): 8 Parity (DIP2 _ 5): None Baud Rate (DIP2_7,8): 19200 9. In the Properties window, after selecting the General tab, click on Print Test Page to confirm that printing is normal. . Parallel (IEEE1284) Fixed Interface Model Windows Driver Installation: SRP-275AP,APG,CP,CPG (IFC-P TYPE) 1. After running the product installation CD, run the lmpact Printer > SRP-275(A/C) > Drivers > Windows Driver > Drivers Folder > Win SRP-275_Vx.x.x.exe file. 2. In the opening installation window, click on Next. 3. In the Ready to Install the Program window, click on Install. 4. In the Select OS Type window, click on Next. 5. In the Select Port Type window, select one Parallel Port and click Next. (Refer to Figure 1.) 6. In the Question window, select Yes and the computer will reboot. 7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275 Icon > Right-Click > Properties. 8. In the Properties window, after selecting the General tab, click on Print Test Page to confirm that printing is normal. . USB Fixed Interface Model Windows Driver Installation: SRP-275AU,AUG,CU,CUG (IFC-U TYPE) 1. After running the product installation CD, run the Impact Printer > SRP-275(A/C) > Drivers > Windows Driver > Drivers Folder > Win SRP-275_Vx.x.x.exe file. 2. In the opening installation window, click on Next. 3. In the Ready to Install the Program window, click on Install. 4. In the Select OS Type window, click on Next. 5. In the Select Port Type window, select USB and click Next. (Refer to Figure 1.) 6-1. If using Windows 98/ME: . After completing the installation procedures, reboot the computer. . After rebooting, turn the printer power off and back on. . After the New Hardware Detected window appears, continue to click Next to install the USB drive, and then reboot the computer once more. 6-2. If using Windows 2000: . After the Information window appears, turn the printer off and back on and click Yes. . After installation is complete, reboot the computer. 6-3. If using Windows XP: . After the Information window appears, turn the printer off and back on and click Yes. . After the New Hardware Detected window appears, continue to click Next to install the USB drive, and then reboot the computer. . Note When the digital registration message appears during installation, click on either OK or Continue Anyway. 7. After rebooting, open Start > Settings > Printers & Fax > BIXOLON SRP-275 Icon > Right-Click > Properties. 8. In the Properties window, after selecting the General tab, click on Print Test Page to confirm that printing is normal. . Ethernet Fixed Interface Model Windows Driver Installation: SRP-275AE,AEG,CE,CEG (IFC-E TYPE) Refer to the user manual regarding separate Ethernet interface cards.(Refer to the CD) . WEEE (Waste Electrical and Electric Equipment) This marking shown on the product or its literature, indicates that is should not be disposed with other household wastes at the end of its working life, To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not...

Herunterladen

Geben Sie zwei Ziffern: