Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Xerox Dateigröße: 62.48 kb Dateiname: 91b1af17-460f-b754-2103-5a49f7dcabb8.pdf Unterrichtssprache:

Press the Enter button when finished. If your printer is an ST model press the Go to Tools button, otherwise skip to the next step. c) The Touch Screen will be used for the remainder of the data entry. 3. Enter the Network Setup menus. a) Wait for the screen to refresh and press the Connectivity and Network Setup button. b) Wait for the screen to refresh and press the Network Setup button. c) Press theTCP/IP Options button. 4. Enable the network interface and protocol. a) Press the TCP/IP Settings button. b) Press the Protocol and Media button. c) Press the Enable button, once pressed the Physical Media buttons will appear, select Ethernet or Token Ring. Press Save to retain the settings and continue. 5. Set the Broadcast Address. a) Press the Broadcast Address button. b) The broadcast address can be calculated this way: Perform a logical OR of the IP address and the complement of the Subnet Mask. Example of logical OR method: IP Address = 13.175.109.146 Subnet Mask = 255.255.252.0 IP Address 00001101.10101111.01101101.10010010 Complement of Subnet Mask 00000000.00000000.00000011.11111111 The result 00001101.10101111.01101111.11111111 Broadcast Address = 13 . 175 . 111 . 255 For assistance, contact your local Xerox Customer Support Center: USA: 1-800-821-2797 Canada: 1-800-939-3769 Page 1 OS/2 TCP/IP Peer-to-Peer Network Quick Install Card Xerox Document Centre 240/255/265 LP/ST c) One at a time press the soft buttons on the Touch Screen for each octet of the broadcast address and enter the numbers from the keypad. When finished press the Save button on the touch screen and you will be returned to the TCP/IP Settings Screen. Go to a workstation and. 6. Set the Host Name. a) Press the Host Name and Address button. b) One at a time press the soft buttons on the Touch Screen for each Octet of the IP address and enter the numbers from the keypad. c) Press the Host Name button. d) When the soft keypad appears, type the host name EXACTLY as you want it to appear with proper case. When finished press the Save button to record the changes and exit to the TCP/IP Settings screen. 7. Set the Subnet Mask and Gateway a) Press the Subnet and Gateway button. c) Press the TCP/IP - LP button. At the next screen press Enable then press Save. d) Press the Exit Tools button. 8. Wait a MINIMUM of 7 minutes for the printer to reset. 9. From the documentation package supplied with your printer, retrieve the CentreWare Network Services CD-ROM (CD-ROM 2) and the document entitled Getting Started with Print and Fax Services. Proceed to the next section of this procedure called Go to a Workstation and... 1. Create a new printer and load print drivers from the CD-ROM. 2. Create a printer share and its access permissions (sharing and connecting). 3. Start LPRPORTD/LPRMON, ping printer, open EPM and send a print job to the printer. 4. Check your test job for quality and use the problem solving section of the Document Centre 240/255/265 Re...

Herunterladen

Geben Sie zwei Ziffern: