Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
1 Turn off the unit, unplug the power cord, and raise the lid. 2 Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water. chapter 5 3 Wash the backing gently to loosen debris; do not scrub the backing. 4 Dry the backing with a chamois or soft cloth. Caution! Do not use paper-based wipes, as these may scratch the backing. 5 If this does not clean the backing well enough, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the backing thoroughly with a damp cloth to remove any residual alcohol. clean the exterior Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the case. The interior of the unit does not require cleaning. Keep fluids away from the interior of the unit and the front-panel. Note: To avoid damage to painted parts of the unit, do not use alcohol or alcohol-based cleaning products on the front-panel or the lid of the unit. maintain the print cartridges To ensure the best print quality from your HP Digital Copier Printer, you will need to perform some simple maintenance procedures and, when prompted by a front- panel message or off-color results, replace the print cartridges. print a self-test report If you are experiencing problems with printing, before cleaning or replacing the print cartridges, you should print a self-test report. This report provides useful information about your print cartridges, including status information. 1 Press Menu. 2 Press 2, and then press 2 again. This selects Print Report and then selects Self-Test Report. A self-test report is printed for your HP Digital Copier Printer. Check the color bars for streaks or missing colors. Make sure cyan, magenta, yellow, violet, green, and red print. If colors are missing or streaked, you need to clean or replace the print cartridges. 22 hp digital copier printer 410 maintain your hp digital copier printer handle print cartridges Before you replace or clean a print cartridge, you should know the part names and how to handle the print cartridge. • HP black (#56) • HP color (#57) • HP photo color (#58) Ink nozzles under tape Copper contacts Plastic tape (must be removed before installing) Do not touch the copper contacts or the ink nozzles use the print cartridge protector When you purchase a photo print cartridge, you also receive a print cartridge protector. The print cartridge protector is designed to keep your print cartridge secure when it is not being used. Whenever you remove a print cartridge from the printer, store it in the print cartridge protector. Note: You may want to use an HP photo print cartridge (#58) for superior print quality when printing photos. With the color and photo print cartridges installed, you have a six-ink system. See order print cartridges on page 59. Also see the HP Digital Printer Copier 410 Printing Guide for more information on printing quality photos. • To insert a print cartridge into the print cartridge protector, slide the print cartridge into the print cartridge protector at a slight angle and snap it securely into place. • To remove the print cartridge from the print cartridge protector, press down and back on the top of the print cartridge protector to release the print cartridge, then slide the print cartridge out of the print cartridge protector. reference guide 23 hp digital copier printer 410 chapter 5 24 replace the print cartridges A message appears on the front-panel when it is time to replace your print cartridges. You may also need to replace the print cartridges if the HP Digital Copier Printer produces off-color results. If you want to print high-quality photos, you can replace the black print cartridge with a photo print cartridge. 1 Turn on the unit, and then open the print-carriage access door by lifting the handle under the front-panel until the door locks into place. The print-carriage moves to the center of the unit. 2 After the carriage stops moving, lift the latch to release the print cartridge, and then pull it toward you out of its slot. 3 If you are removing the black print cartridge in order to install the photo print cartridge (#58), store it in the print cartridge protector. 4 Remove the new print cartridge from its packaging and, being careful to touch only the black plastic, gently remove the plastic tape (using the pink pull tab) to uncover the ink nozzles. Caution! Do not touch the copper contacts or ink nozzles. Be sure not to re-tape print cartridges, as damage to the print head may occur. Latches reference guide maintain your hp digital copier printer 25 5 Push the new print cartridge into the appropriate slot. The tri-color print cartridge (#57) goes on the left and the black (#56) or photo print cartridge (#58) goes on the right. 6 Pull the end of the latch toward you, press down until it stops, and then release. Make sure the latch catches below the bottom tabs. 7 Close the print-carriage access door by pulling down (and releasing) the supporting latch below the...