Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: First Alert Dateigröße: 380.91 kb Dateiname: c0c2cc2d.pdf Unterrichtssprache:

10. If you suspect a fire had an electrical origin, shut off the electrical power, if possible, without eliminating your escape route. Do not touch electrical wires or appliances. 11. After you have completely discharged your extinguisher, leave the building and close all the doors behind you. AFTER THE FIRE IS EXTINGUISHED Do not turn the electrical power back on or plug in any appliances until the area has been cleaned up completely. It is very important to remove the powder from electrical equipment after a fire. If the powder gets wet, it can conduct electricity. (Using a dry chemical extinguisher on wet electrical equipment may be hazardous for this reason.) This may worsen an electrical leakage problem, impair the equipment’s insulation, or create an electrical shock hazard. If the fire was on a kitchen stove: • Make sure the oven and all burners are turned off. • Clean up the powder completely before using the stove or oven. See “How to Clean After Using a Fire Extinguisher”. Ventilate the area thoroughly. If you think the fire had an electrical origin: • Shut off the electrical power, if possible--do not touch any electrical wires or appliances. • Leave the building and close all doors behind you. Call the Fire Department and have them inspect the premises. As soon as they say it’s safe to return, ventilate the area thoroughly. • Have a licensed electrician inspect your electrical system. Do not turn the power back on or plug in any electrical equipment until • Sweep/vacuum up as much of the powder as possible. Then use a damp cloth to wipe off the remaining agent. • If you have any questions about cleaning appliances that the agent has come into contact with, please contact the appliance manufacturer. IF YOUR EXTINGUISHER NEEDS SERVICE This fire extinguisher is rechargeable by a certified fire equipment dealer, regardless of how much of the content was used. Once a year, a certified fire equipment dealer, in accordance with the service manual identified on the fire extinguisher label, should service the fire extinguisher. Please refer to your local telephone directory for a certified dealer. Do not try to service or repair this fire extinguisher under any circumstances. Do not try to remove the nozzle or valve assembly. This is a pressurized device that can cause serious injury if tampered with. If there is a problem and it is still under warranty, please see “How to Obtain Warranty Service” in the Limited Warranty. DISPOSING OF A USED EXTINGUISHER If you choose not to have a used extinguisher refilled or a non-working unit repaired, take it outdoors, turn it upside down, and discharge it completely. Dispose of the empty unit properly, and replace it with a new fire extinguisher. Never puncture, burn or expose this fire extinguisher to temperatures over 150° F (66° C) even if it is fully discharged. The contents are under pressure and it could explode. LIMITED WARRANTY BRK Brands, Inc. ("BRK") the maker of First Alert® brand products, warrants that for a period of ten years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. BRK dealers, service centers, or retail stores selling BRK products do not have the right to alter, modify or any way change the terms and conditions of this warranty. This warranty does ...

Herunterladen

Geben Sie zwei Ziffern: