Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: BRK electronic Dateigröße: 1.09 mb Dateiname: Unterrichtssprache:

Use the Silence Feature to silence the Alarm. This will silence the alarm, and once the smoke clears the unit will reset itself automatically. WHAT TO DO IN CASE OF FIRE • Don’t panic; stay calm. Follow your family escape plan. • Get out of the house as quickly as possible. Don’t stop to get dressed or collect anything. • Feel doors with the back of your hand before opening them. If a door is cool, open it slowly. Don’t open a hot door. Keep doors and windows closed, unless you must escape through them. • Cover your nose and mouth with a cloth (preferably damp). Take short, shallow breaths. • Meet at your planned meeting place outside your home, and do a head count to make sure everybody got out safely. • Call the Fire Department as soon as possible from outside. Give your address, then your name. • Never go back inside a burning building for any reason. • Contact your Fire Department for ideas on making your home safer. Alarms have various limitations. See "General Limitations of Smoke/CO Alarms" for details. “SMART INTERCONNECT” FEATURE This Alarm includes "Smart Interconnect" which enables the Alarm to be interconnected with other BRK Smoke, Heat, and "Smart Interconnect" CO Alarms. When smoke is detected, all Alarms will sound the smoke horn pattern. When CO is detected, "Smart Interconnect" Alarms will sound the CO horn pattern. Alarms that do not have the "Smart Interconnect" Feature will remain silent during a CO alarm. USING THE SILENCE FEATURE NEVER disconnect the power to your Smoke/CO Alarm to silence the horn—use the Silence Feature. Disconnecting the Smoke/CO Alarm removes your protection! If the unit will not silence or if it stays in silence mode continuously, it should be replaced immediately. • The Silence Feature is intended to temporarily silence the horn while you identify and correct the problem. Do not use the Silence Feature in emergency situations. It will not correct a CO problem or extinguish a fire. • To use the Silence Feature, press the Test/Silence button until you hear the acknowledge “chirp” or until the horn is silent. • If the Test/Silence button is pressed while the Smoke/CO Alarm is in the silence mode, the alarm will start sounding again. To silence Alarms in an interconnected series: To silence an interconnected series of Smoke/CO Alarms, you must press the Test/Silence button on the initiating alarm (The unit with the flashing red light; the red light will be off on all other Alarms.). If you press the Test/Silence on any other Alarm, it will only silence that unit, not the whole interconnected series. WHEN THE SMOKE ALARM IS SILENCED... The Smoke Alarm will remain silent for up to 15 minutes and then return to normal operation. If the smoke has not cleared within the silence period or if smoke increases to a critical level during the silence period, the unit will go back into alarm. Use the Silence Feature only if you are certain of the source of smoke. If you are not certain of the source or a fire starts while you are clearing smoke, evacuate the house immediately. Not responding to an alarm can result in property loss, injury, or death. WHEN THE CO ALARM IS SILENCED... The CO Alarm will remain silent for 4 minutes. While the Alarm is silenced, it will continue to monitor the air for CO. After 4 minutes, if CO levels remain potentially dangerous the horn will start sounding again. The Silence Feature is intended to temporarily silence the Alarm horn. It will not correct a CO problem. LOW BATTERY SILENCE FEATURE This Silence Feature can temporarily quiet the low battery warning “chirp” for up to 8 hours if AC power is present. Press the Test/Silence button on the Alarm cover until you hear the acknowledge “chirp”. Once the low battery warning “chirp” silence feature is activated, the unit continues to flash the green light once a minute for 8 hours. After 8 hours, the low battery “chirp” will resume. The Alarm will continue to operate as long as AC power is supplied. However, replace the battery as soon as possible, to maintain protection in event of a power outage. Continued... If you hear the alarm horn sound 3 beeps, pause, 3 beeps, pause and the RED SMOKE light is flashing, smoke has been detected. Evacuate everyone from the building. Using the Optional Locking Features (Continued) WHAT TO DO IF CARBON MONOXIDE IS DETECTED, Continued Actuation of your CO Alarm indicates the presence of carbon monoxide (CO) which can kill you. In other words, when your CO Alarm sounds, you must not ignore it! • Connect this unit ONLY to other compatible units. See “How To Install This Smoke/CO Alarm” for details. Do not connect it to any other type of alarm or auxiliary device. Connecting anything else to this unit may damage it or prevent it from operating properly. • The battery compartment resists closing unless a battery is installed. This warns you the unit will not operate under DC power without a battery. • Do not stand too close to the unit when the alarm is sounding. It i...

Herunterladen

Geben Sie zwei Ziffern: