Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
It shall be powered by a 120VAC, 60 Hz source. The temperature operating range shall be between 40°F and 100°F (4°C and 38°C) and the humidity operation range shall be 5% - 95% relative humidity. The CO sensor shall be of a fuel cell design and shall meet the sensitivity requirements of Underwriters Laboratories UL 2034 Single Station Carbon Monoxide Detectors. The unit shall provide accuracy of +/-20% + 15 parts per million (ppm) when reading CO concentration levels. The alarm shall include an attached plug that can be installed in any outlet following the UL/NFPA/Manufacturer’s recommended guidelines. The plug shall be capable of being rotated so the alarm remains vertical independent of whether the electrical socket is mounted vertically or horizontally. The unit shall incorporate a digital display that meets the sensitivity requirements of UL 2034. The display will identify the levels of CO in parts per million (ppm) once that level reaches 30ppm (i.e.: “abnormal” levels). The display will have a red dot in the lower right corner that will blink to indicate the normal operation. The alarm shall include a test button that will electronically simulate the presence of CO and cause the unit to go into alarm. This sequence tests the unit’s electronics to ensure proper operation. The CO sensor will not alarm to levels of CO below 30 ppm and will alarm in the following time range when exposed to the corresponding level of CO. The alarm shall include a piezoelectric horn that is rated at 85 decibels at 10 feet. When the unit detects carbon monoxide, the alarm pattern will be four (4) short beeps – followed by five (5) seconds of silence – followed by four (4) short beeps. A number reading will appear on the digital display identifying the CO concentration (in ppm). *Based on accuracy claims of major manufacturers The unit shall include a peak level memory feature that will store the peak CO level sensed since the unit was last reset. The peak CO level stored in the unit’s memory shall be displayed (in ppm) on the digital display by pressing the appropriate button on the unit. The memory shall also be capable of being reset. The unit shall be listed to UL 2034. It shall also include a 5-year manufacturer’s limited warranty. Technical Specifications Part Number: 900-0056 Unit Number: KN-COP-DP UPC Number: 7-84608-00560-1 Power Source: 120VAC Sensor: Electrochemical Audio Alarm: 85dB at 10ft Temperature Range: 40°F (4.4°C) to 100°F (37.8°C) Humidity Range: Up to 95% relative humidity (RH) Size: 5.65”L x 3.25”W x 1.9”H Weight: 1lb Interconnects: No Wiring: Plug-In LED: Displays CO concentration in PPM Warranty: 5 year limited 3.25" 1.9" 5.65" Ordering Information Clam Shell UPC: 7-84908-00560-1 Part Dimensions Case/ Layers/ Skid Number I 2 of 5 Pack Quantity (w x d x h inches) Weight Skid Skid Weight 900-0056** N/A Individual 7 x 2.5 x 10.75 1lb N/A N/A N/A 900-0056-02 107 84908 00560 8 PDQ (2 units) 7.75 x 6 x 11.75 2lbs 105 3 210lbs 900-0056-07 207 84908 00560 5 Master Pack (4 units) 7.75 x 11.5 x 12 4lbs 80 4 320lbs 900-0056-012 307 84908 00560 2 Cut Case (12 units) 15 x 18 x 12 12lbs 18 3 216lbs 900-0056-036 407 84908 00560 9 Power Tower (36 units) 20 x 24 x 50 (incl. pallet) 36lbs 3 3 108lbs **Not for sale by individual unit UNIT PDQ MASTER PACK CUT CASE POWER TOWER 1 2 4 12 36 Distributed by: 1394 South Third Street, Mebane NC 27302 1-800-880-6788 • ...
Dieses Handbuch ist für folgende Modelle:Alarm - KN-COP-DP (124.13 kb)