Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 2.64 mb Dateiname: Unterrichtssprache:

If you select Of f , you permanently switch off the TV speakers. If you select On, the TV speakers are always on. With an audio device connected with HDMI CEC, you can use one of the Eas yLink s ettings. If you select EasyLink, the TV sends the TV sound to the audio device. The TV will s witch off the TV s peakers when the device is playing the sound. If you select EasyLink autostart, the TV will switch on the audio device, s end the TV s ound to the device and s witch off the TV speakers. With Eas yLink or EasyLink autostart s elected, you can still switch to TV speakers or device speakers in the Picture and sound menu. To set the TV speakers . . . TV / Sound settings 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Sound > Advanced > TV speakers. 3 - Press x (right) and select On, Of f , EasyLink or EasyLink autostart. 4 - Press b, repeatedly if necessary, to close the menu. To switch speakers in the Picture and sound menu . . . 1 - While watching TV, press o OPTIONS and select j Picture and sound. 2 - Select Speakers and select TV or Amplifier (audio device). 3 - Press b, repeatedly if necessary, to close the menu. Clear sound With Clear sound, you improve the s ound for speech. Ideal for news programmes. You can switch the speech improvement on or off. To switch on or off . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Sound > Advanced > Clear sound. 3 - Press x (right) and select On or Of f . 4 - Press b, repeatedly if necessary, to close the menu. Audio Out format With Audio Out format you can set the audio out s ignal of the TV to fit the sound processing capabilities of your Home Theatre System. For more information, pres s * LIST and look up Audio Out format. Audio Out leveling With Audio Out leveling you can level the s ound volume of the Home Theatre System with the volume of the TV when you s witch over from one to another. For more information, pres s * LIST and look up Audio Out leveling. HD MI ARC If you do not need an Audio Return Channel (ARC) on any of the HDMI connections, you can switch the ARC signal off. For more information, pres s * LIST and look up HD MI ARC. Audio Out delay If you s et an Audio s ync delay on your Home Theatre Sys tem, to synchronise the sound with the picture, you must switch off Audio Out delay on the TV. For more information, pres s * LIST and look up Audio Out delay. Audio Out offset If you cannot set a delay on the Home Theatre Sys tem, you can s et a delay on the TV with Audio Out offs et. For more information, pres s * LI ST and look up Audio Out of f set. TV placement As part of the first installation, this setting is set to either On a TV stand or Wall mounted. If you have changed the placement of the TV since then, adjust this setting accordingly for best sound reproduction. 1 - Press h, select S Setup and press OK. 2 - Select TV settings > General settings > TV placement and press OK. 3 - Select On a TV stand or Wall mounted and press OK. 4 - Press b, repeatedly if necessary, to close the menu. 3.10 Ambilight settings Ambilight on or off Press AMBI LIGHT on the remote control to open the Ambilight mode menu. You can switch Ambilight On or Of f . Alternatively, you can select the Ambilight mode you prefer, Dynamic or Static. Ambilight brightness With Brightness, you can set the level of brightnes s of the Ambilight. To adjust the level . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Ambilight > Brightness. 3 - Press x (right) and adjust the value with u (up) or v (down). 4 - Press b, repeatedly if necessary, to close the menu. Ambilight mode Ambilight can have a dynamic or a static mode. With Dynamic, the TV follows the colours of the image on screen. You can adjus t the s peed at which Ambilight res ponds . With Static, Ambilight has a constant static colour. You can create an Ambilight s tatic colour yours elf. Firs t, s elect the Ambilight mode you prefer. To select an Ambilight mode . . . TV / Ambilight settings 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Ambilight > Mode. 3 - Select Dynamic, Static or Of f . 4 - Press b, repeatedly if necessary, to close the menu. Dynamic speed With D ynamic, you can set the speed at which Ambilight responds to the images on screen. Adjust the speed between Relaxed or Dynamic. The Ambilight mode must be set to Dynamic before you can adjus t Dynamic s peed. To adjust the speed . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Ambilight > Dynamic. 3 - Press x (right) and adjust the value with u (up) or v (down). 4 - Press b, repeatedly if necessary, to close the menu. Static colour With Static, you can set the static Ambilight colour. You can create a colour yours elf or s elect one of the two white light pres ets . The Ambilight mode mus t be s et to Static before you can create a s tatic colour. To create a colour yourself . . . 1 - Press h, select S Setup and press OK. 2 - Select TV settings > Ambilight ...

Herunterladen

Geben Sie zwei Ziffern: