Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Cuisine-Cookware Dateigröße: 2.31 mb Dateiname: Unterrichtssprache:

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments. COOKWARE Heavy 10.4 gallons, 102 minutes Medium 9.1 gallons, 77 minutes Light 7.8 gallons, 72 minutes This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils. This cycle may not remove burned-on foods. Everyday dishes are safe to be used in this cycle. NORMAL Heavy 9.1 gallons, 78 minutes Medium 6.5 gallons, 60 minutes Light 5.2 gallons, 49 minutes This cycle is for medium/heavily soiled dishes and glassware. SPEED CYCLE Heavy 7.8 gallons, 37 minutes (on some models) Medium 6.5 gallons, 33 minutes Light 5.2 gallons, 29 minutes This cycle is for everyday dishes and glassware. Control Panel/Operation Dishwasher CHINA CRYSTAL Heavy 9.1 gallons, 53 minutes Medium 7.8 gallons, 45 minutes Light 6.5 gallons, 38 minutes This cycle is for lightly soiled china and crystal. GLASSES Heavy 9.1 gal., 40 minutes (on some models) Medium 7.8 gal., 30 minutes Light 6.5 gal., 20 minutes This cycle is specifically designed for glasses. PLASTICS Heavy 9.1 gal., 120 minutes CYCLE Medium 7.8 gal., 105 minutes (on some models) Light 6.5 gal., 90 minutes This cycle is specifically designed to reduce the risk of melting plastic items and improve plastic drying for dishwasher safe plastic items. RINSE ONLY Heavy 2.6 gallons, 7 minutes Light 1.3 gallons, 4 minutes For rinsing partial loads that will be washed later. Do not use detergent with this cycle. 2 DELAY START— This option will allow you to delay the start time of any wash cycle for up to 8 or 24 hours (depending on model). • Select the delay start time you want by pressing the DELAY START pad. Multiple or continuous pressing will increment the delay hours. Select the number of hours you want to delay the start of the cycle. Then press START/RESET. • After closing the door, the machine will count down and automatically start at the correct time. NOTE: To cancel the DELAY START selection before the cycle begins, press the DELAY START pad until the display is blank. Pressing START/RESET will not cancel delay hours. 3 ADDED HEAT— When selected, the cycle will run longer with heating elements on to improve both wash and dry performance. NOTE: Cannot be selected with RINSE ONLY cycle. 4 PRE WASH— For use with heavily soiled and/or dried-on, baked-on soils. This option (on some models) MUST be selected PRIOR to starting the cycle. This option adds 16 minutes to the cycle time. NOTE: Cannot be selected with RINSE ONLY cycle. 5 HEATED— DRY When selected, turns the drying heater and fan on for fast drying. This option will extend the cycle time by 30 minutes for the ANTI-BACTERIAL cycle, 38 minutes for the NORMAL cycle and COOKWARE cycle, 8 minutes for the SPEED cycle, 15 minutes for the PLASTICS cycle and 30 minutes for all other cycles. When this is NOT selected, the fan will turn on to dry your dishes without added heat—and energy is saved. NOTE: Cannot be selected with RINSE ONLY cycle. 6 LOCK — You can lock the controls to prevent any selections from being made. Or you can lock the controls after you have started a cycle. Children cannot accidentally start the dishwasher by touching pads with this option selected. To lock the dishwasher controls, press and hold the HEATED DRY pad for 3 seconds. The LOCK light will turn on. To unlock the dishwasher controls, press and hold the HEATED DRY pad for 3 seconds. The LOCK light will turn off. Control Panel/Operation Dishwasher 7 Status Indicator Lights (indicators vary by model) The Status display tells you what is happening while the dishwasher is in operation. The lights will come ON, indicating the sequence of the dishwasher operation. SENSING Displayed while the ExtraClean™ Sensor is measuring the amount of soil and temperature of water. The dishwasher will adjust the selected cycle to achieve optimal performance. ADD-A-DISH Displayed during prewash indicating that dishes added now will still be cleaned. WASHING Displayed during prewash, main wash and rinse periods. DRYING Displayed during HEATED DRY. SANITIZED Displayed when cycle has met sanitization conditions. CLEAN Displayed when a wash cycle and enhancements are complete. 8 Time Remaining Display (on some models) During operation, the display shows the minutes remaining until the cycle is complete. The display may adjust the remaining time while the Sensing light is on. The time displayed at the start of each cycle may change from the factory setting as the unit customizes itself to home use. During a delay start, the display will show hours of time remaining until the cycle starts. 9 START/RESET START— After selecting the cycle and desired enhancements, press the START/RESET pad to ready the dishwasher to begin the cycle. Close the door to start the cycle or begin the DELAY START countdown. When the cycle starts, the water fill begins and approximately 60 seconds later the wash action begins. The dishwasher will always display your last selection and e...

Herunterladen

Geben Sie zwei Ziffern: