This weather station is constructed of durable materials and has a reception range of up to 50 miles (64 km). It is also equipped with weather information display, digital clock and daily alarm. Keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should know. ABOUT THE NATIONAL WEATHER RADIO SYSTEM The National Weather Service (NWS) is an agency within the National Oceanic & Atmospheric Administ

Nous vous recommandons Sensor und anschlie.end in der Basiseinheit. Nach jedem with this product for longer usage and lithium batteries in zero si consiglia l’uso di batterie al litio. unit. Press RESET after each battery change. Do not d’utiliser des piles alcalines pour un usage prolonge et des Batteriewechsel auf RESET drucken. Verwenden Sie keine temperatures below freezing. use rechargeable batteries. We recommend that you use piles au lithium lors de temperatures inferieures au gel. wieder

Alle EG Staaten, die Schweiz N CH selezionare un canale diverso per ciascuno di essi. differenziato. E necessario che questo rifiuto venga • Verwenden Sie keine wiederaufladbaren Batterien. und NorwegenCollocare il sensore vicino all’unita principale. Premere smaltito mediante raccolta differenziata per essere • Entfernen Sie alle Batterien, wenn Sie das Produkt RESET sul sensore. Successivamente, premere il trattato in modo particolare. 3. Stellen Sie den Kanal ein. Wenn Sie mehr als einen uber

If installing additional sensors, make sure you assign a different channel for each sensor. Press the reset button Before placing the sensor outdoors, please verify communication with the main unit by placing the sensor next to the base unit during this setup process. 3 4 3 4 * Atomic Clock Signal Atomic clock synchronization will automatically occur after installing the batteries. Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to retrieve a valid signal. Please

MODE: Change settings / display 3. CHANNEL: Switch remote sensor display 4. MEM: View current, maximum and minimum temperature / humidity 5. PRESSURE: Select pressure unit; set altitude 6. HEAT INDEX: Display heat index 7. TEMP / HUMIDITY HI / LO : Change settings or enable / disable hi or lo temperature / humidity alarm for channel 1 8. °C / °F: Select temperature unit 9. RESET: Reset unit to default settings 10. Battery compartment REMOTE SENSOR (THGR122N) .... Wireless Weather Station with Te

Please keep this manual for instructions and information you should know about. PRODUCT OVERVIEW 1. Crystal weather forecast unit 2. LED lights (LED Aperture) 3. IR motion sensor 4. Time zone hour offset 5. Time and temperature display 6. CLOCK: Sets time 7. / : Enables / disables radio-controlled clock; increases / decreases setting value 8. .C / .F: Changes measurement unit 9. RESET: Returns unit to default settings 10. Weather icon direction indicator 11. 12-hour clock 12. Temperature unit 13