In this package you will find: One Five-Channel Remote Thermo-hygrometer (transmitter) (TS34C) One User Manual Standard Package Contents Picture Components Thermo Hygrometer Sensor Installation All data measured by this remote sensor is transmitted to the main unit wirelessly, with the operating range up to 328 feet (100 meters) in the open area. Remote thermo-hygrometers (temperature & humidity sensors) can be placed indoors or outdoors, depending on the area where the temperature and humidity

• Install 2 “ AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment. • Replace the battery compartment door and secure the screws. • Secure remote sensor in the desired location. LOW BATTERY WARNING A low-battery indicator [ ] will appear on the remote temperature reading line of the main unit, warning that the remote sensor batteries need replacement. PLACEMENT OF THE REMOTE SENSOR The remote sensor can be mounted on the wall using the recessed scre

TEMPERATURE AND HUMIDITY INFORMATION IN A TWO LINE LCD DISPLAY D B C B. CHANNEL BUTTON • Selects the desired remote channel or indoor readings C. SEARCH BUTTON • Enforces the remote sensors signal search D. MEMORY BUTTON • Toggles between current, minimum and maximum readings of the indoor and remote temperature and humidity • Clears the maximum and minimum memory of registered temperature and humidity 5 REAR VIEW E F G E. WALL-MOUNT RECESSED OPENING H • Keeps the main unit on the wall F. BATTER

The remote temperature sensor (TX6U) and mounting bracket (Figure 2) 3. (3) 1/2" Philips screws 4. One strip of double sided adhesive tape 5. Instruction Manual and Warranty Card 6. (2) AAA 1.5V batteries 7. (2) AAA 1.5V batteries ADDITIONAL EQUIPMENT 1. Philips screwdriver (not included) Figure 1 Figure 2 2 QUICK SETUP Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor temperature station and remote temperature sensor 3 to 5 feet apart. 2. Batteries s

Note: In order to display the rainfall amount and related items, you must own a main display unit (TE923WD) for the Professional Weather Station TE923W. In this package you will find: One Rain Gauge (remote rain sensor/transmitter) (TS906) Mounting Hardware One User Manual Standard Package Contents Picture Components Rain Gauge consists of: Funnel shaped top with battery compartment Rain Gauge bucket Bucket see-saw mechanism Protective screen 4 screws for securing rain gauge to the flat surface

In this package you will find: • One main unit (receiver) • One remote rain gauge (transmitter) • One remote temperature sensor (transmitter) TS13C Please keep this manual handy as you practical step-by-step instructions, well as technical specifications and precautions you should know. 3 PRODUCT OVERVIEW MAIN UNIT FEATURES • Wireless transmission of the rainfall data from the remote rain gauge to the main unit up to 100 feet (30 meters) away • Wireless transmission of the temperature from the r

The Time Zone is set CLOCK • Press and hold MODE button for 3 seconds: the year will flash. Press UP ( ^ ) or DOWN ( Ў ) to change flashing digits. • After the year is set, press MODE button to confirm and move to the 22 21 next parameter ( month) • Continue setting month, date, hour, minutes, language for the day of the week and temperature in Fahrenheit or Celsius • Press MODE for the last time to return to the time of day with seconds, after the last parameter is set CLOCK ALARMS The Barometr

Warning: Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment had been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment, installed and used in accordance with the instructions, m

MAIN UNIT • Remove the battery compartment door. • Install 2 batteries ( UM-3 or “ AA” size 1.5V) matching the polarity as shown in the battery compartment. • Replace the battery compartment door. LOW BATTERY WARNING A low- battery indicator [ ] will appear next to the indoor or remote data reading line of the main unit warning that the corresponding batteries need replacement. 9 GETTING STARTED WEATHER DISPLAY After batteries are installed; remote sensor will transmit temperature data at 45 sec

• Place the remote UV sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls and furniture. Installation The Honeywell Remote UV sensor TS704 operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote UV sensor (transmitter). All data measured by the remote UV sensor is transmitted to the main unit wirelessly, with the operating range of 328 feet (100 meters) in the open area. Remote UV sensor mu