Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
in all poles. • The appliance must be connected by means of wires having an appropriate temperature marking. • A disconnection (terminal block) must be provided in the fixed wiring. • It is essential that a licensed electrician connects the stove to the electricity supply point in the kitchen. • The rated current is printed on the serial sticker located on the rear panel of the stove. IMPORTANT: This appliance must be earthed and the manufacturer and the seller do not accept responsibility for any damage due to incorrect installation or electrical connection. OVEN CONTROL (Baking) • Set the oven control to the desired temperature. • The indicator light will glow and remain on until the oven has reached the selected temperature. • When the indicator light switches off, the food should be placed in the oven. • During baking the indicator light will regularly cycle on and off as the oven thermostat maintains the selected temperature. • The door may be opened, for inspection purposes, after about half the cooking time has elapsed. OVEN CONTROL (Grilling) THE OVEN DOOR MUST BE KEPT CLOSED DURING GRILLING • Set the oven control to the grill position. • Place the oven shelf on the top shelf position. • Place the item to be grilled in a roast pan on the shelf under the pre-heated grill element. • The oven door may be opened to check on the grilling process which should be done every 5 to 10 minutes to avoid burning the food. • The oven control must be turned to the OFF position when grilling is complete. SPIRAL PLATES SPIRAL PLATES • The markings around the plate control knobs represent the following heat settings: • Position 1-4 = Gentle simmer to simmer. Position 4-6 = Fast simmer to medium heat Position 6-8 = Hot to maximum heat • The relevant plate indicator light will glow when a plate is switched on.. SPIRAL PLATE CARE • Use pots with a base diameter slightly larger than the plate. This will ensure even heat distribution and prevent spillage from dripping onto and staining the plate. • Always cover the pot with a lid as this will conserve energy and minimise spillage. CLEANING SPIRAL PLATES • Switch off the electrical supply point to the stove. • When the plates are cold, lift the hinged spiral plate up and remove the supports and trims. • Slide the drip tray out from under the hob. • Use hot soapy water to clean the plates, plate supports, trims and drip tray. Use a nylon brush on badly soiled items. • Wipe dry after cleaning and replace items. SOLID PLATES Before using the plates for the first time, switch them on for four minutes at the highest setting. This allows the factory applied protective coating to burn in. The markings around the plate control knobs represent the following heat settings: Position 1 = Warming. 2 = Slow simmer. 3 = Simmer. 4 = Medium heat. 5 = High heat 6 = Boiling and frying. The plate indicator light will glow when a plate is switched on. SOLID PLATE CARE • Use only good quality flat bottomed pots and ensure that the pot diameter is the same as or slightly larger than t...
Dieses Handbuch ist für folgende Modelle:Standbacköfen - 520 (74.96 kb)